开云体育

That doesn't seem like a rational and logical next step for an amateur radio operator in a learning mode. A simple Google search would have answered such a basic question and it would also have

Martin, I apologize for not answering your question in real time. I always assume some else will. I view VARA as a mode within Winlink, and as you know there are real problems, both technical and

I am surprised and disappointed that I have had no response to my query, so am leaving the group. 73 de Martin, G4FFC.

Sorry about that. Was assisting with APRS radios install in SAG vans for an event with phone in back pocket.

I've heard folks sitting on the mic, but the keyboard?!?

*Thanks for letting me in! * AL M KF5SMH

?3434?3343432333343423443

Be sure the audio levels are set correctly. We went thru the same thing on our N4SER gateway where the transmit knob on the Signalink had to be turned down to make sure audio didn't overdrive. I found

I have a Winlink gateway setup using RS Packet 2.1.32.0. I have AX25 packet working on a KPC9612 and Vara FM set up on a different frequency and different radio. Vara FM is on an IC-7100. Drive level

Jeff, I realize this is an old thread and message, but could you point me in the direction of some documentation on using a repeater with VARA FM? Thanks in advance AL M KF5SMH

Only recently heard about this mode, so wondering where I will find activity just to monitor please? 73 de Martin, G4FFC.

Monitor window doesn't show anything. I can connect, pass messages with another station but, the monitor window is always black when listening. What am I missing ? Thanks, Pete, N1ZRL

When I first downloaded the VARA program as instructed on WINLINK, I connected to our MARS system without any problems on VARA and WINMOR WINLINK. SO I bought the VARA program. Now when I connect I

Try this: In the Set Mode Menu, go to CONNECTORS, then DATA MOD and select USB. -Tad NH7YS

So I tried VARA out and for some reason it double keys my FT-857D radio. I don’t think that is good for the radio. Radio and Signalink works Winlink, ARDOP, WINMOR just perfectly. William, N5WOI.

Ralph, it is NOT likely that you want RMS express to point to the VARA install exe. Vara install is intended to run only ONCE. you really want RMS express to run C:\VARA FM\VARAFM.exe or some path

Resolved. Reinstalled RMS Express. [email protected]> wrote:

Trying to setup When opening VARA FM P2P the session window opens but says C:\Vara FM\VARA Install.exe File not found Tried this with AV on and off, File excluded from scanning. The file is in the

Yes, I’m using ?the usb codec option on the vara setup. I’ve also set my alc as shown on the vara sound card setup screen. That what’s puzzling to me.

Have you selected the correct sound card within the VARA application itself? There is a slider there as well for setting the correct levels. GaryWB9AYD