New member in this group, I'm configuring my QRP-Labs QDX with Winlink Express using Vara HF Winlink.
There is NO output power from the QDX when I start a transmission with Winlink Express, the indications given by the QDX show that "QDX is receiving audio from my PC but the volume is insufficient to trigger the key-down transmit action.?
My PC is running Windows 11, the PC audio setting of Vara modem is set to 100%.
Question: is there in the Vara HF v.4.8.9 a way to set the audio volume to 100%, I did not find in the various buttons?
Among the settings already put I have: Flex radio - USB - Use radio internal soundcard - Com3 - 9600 baud Serial port to use Flex with 9600.
In the Vara HF TNC I have set Device output: Interface audionumeric (QDXT and when I push Tune, nothing happens.
Obviously the QDX obbeys CAT commands from the PC but the audio level is not enough to trigger the transmission. If a member has already set a QDX with Winlink Express using Vara HF TNC all informations about his settings and results will be appreciated.
73 - Pierre - FK8IH
