I did briefly looked at all this last evening..
All three work if I disable any one the other two work perfectly correctly.. Its when I have all three that the one for the 706 tx's on the VHF rig so not only does the VARA-FM TX the VHF port so does one of my VARF HF ports..
Signalink PTT is I think just a VOX Function have to have enough TX audio to key.. If I am not mistaken..
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Dave
Sent: Wednesday, December 5, 2018 8:59 AM
To:
[email protected]Subject: Re: [VARA-MODEM] Just a Pipe Dream???
A Windoze issue? What does Windoze Device Manager tell you? Do all three light up? Any errors showing? Port issues? How does Signal link handle PTT? Could be a config file problem? You probably have already checked these.
Dave - W7EES
On 12/5/18 3:04 AM, Jerome Kutche wrote:
Good morning ok I have running on my win7 pc remote to Linbpq 2
versions of VARA on 2 signalinks.. All works great..
Signalink one USB AUDIO CODEC (746PRO) Signalink two USB audio Codec
(706MKIIG)
Note the difference in case that is how I can quickly tell which radio
it is linked too ..
The correct parts all control the correct radios.
Here is the kicker.. If I add a 3rd Signalink the sound card is names :
3+ USB audio Codec (Icom2200H) for use with VARA-HF
It also keys the correct radio and listens to the correct radio.. But
now after adding this third signalink... the VARA linked to the 746
will no longer key the 746 but will now key the ICOM 2200H . I checked
all soundcards and they appear to disappear if I disconnect the
Signalinks one at a time and come back one at a time as I plug them back up..
Any thoughts.. Ya I know kind of a bit much.. But was really wanting
to try VARAFM...
May be a short attempt. Not spending more then a few days trying to
figure it out.
Thanks Jerry
--
- Dave - W7EES -
