开云体育

Hi Alexander can you give more details on your quick change tool post? Did you make it yourself? Thx!

Sold for $470, I estimate $60 for shipping at least to my ZIP Code. So all in at $530.

Hi James, I'll write up a new thread showing images of what I have done, the Indexer and controller I made so I could move between different machine's CNC, Miller, Lathe it has it's own power supply

Hello Steve, I'll write up a new thread showing images of what I have done, the Indexer and controller I made so I could move between different machine's CNC, Miller, Lathe it has it's own power

For reference this is a picture of the unimat pc tailstock spindle. It has m14 threads for screwing on chuck / collet / live center.

Hey all Bit by bit I'm learning more about my lathe (as a total newbie) I'm moving to the point where I'm trying to align my tailstock and have but a couple of stumbling blocks - I dont have any form

Interesting - I’ve been kicking that idea around for a while. The old 1900s collector toy trains are pricy items, but can I build something similar? Good question. Right now I’m wondering if I can

Hi Gang: Do check on shipping, the lathe is in Alaska! Carl.

Hi Phil, I really like your power feed setup, and am intrigued by your dividing head index controller.? Could you post more information and pictures? I'd like to explore this, but haven't had any

Hi Phil, I'd love to see more pics of your setup, hi-res if possible, as I plan to do something very similar. Especially interested in the indexed divider, am thinking about the same for my vertical

There ia a?Emco Unimat 3 Lathe Attached To Wooden Box/ Accessories for auction at the Goodwill site. The auction ends at??04/07/2023 07:46:00 PM PT. Richard B.

I forgot to add I looked at adding plastic washers but guessed they might wear in time, I don't like the bent compression washers I think that would introduce some movement, I think by adding a

Hi Dick, I never gave it a thought about making two like you have I just went looking at bearing supplies and found just what I was looking for, it has improved my little lathe 99% I don't have any

On my 7x16 minilathe I made a small ball thrust bearing on the cross slide and was able to remove virtually all back lash on the cross slide of my minilathe. It was made from tiny loose balls in a

Additionally it’ll add friction to a point in the system where you really don’t want additional friction. I find the best thing is to make a small washer out of a piece of plastic shim stock. That

Hi Jeff: The usual method is to take two motors apart and combine the stampings. I have used my Unimat to rewind a small can motor for one of my Lionel trains. I used my Erector set motor to turn the

Hi: The problem with the wave washer is, under a cutter load the side force will collapse the washer and the cutter path won't be straight. Carl.

Hi Gang: To improve the casting is just half of the job, you need to improve the runout on the knob. Both can be corrected with a file. Use some Persian Blue, coat the back of the know and run it up

The hard part would be the layered sheet steel stampings for the armature. You need them for it to work instead machining a solid armature.?Jeff

Hammertone paint used to be considered a very rugged industrial coating that was also oil and solvent resistant.?Jeff