开云体育

I think the small black removeable gear wheel comes with the fine feed, the handle comes with the mill. So someone somewhere is missing the gear wheel for their fine feed.

Then the two pieces bolt on to the side of the milling head to provide the fine feed, like this: Loosening the bolt allows rear of the silver portion to move upwards, which disengages the fine feed

Yes it is it goes with this bit. Regards Bob

Hi Bob. Is it a Unimat product? Thanks for your input, Rick

Its the fine feed. Regards Bob

I bought this Unimat 3 quill handle and it has this gear on it. Is this a Unimat item for a quill feed drive, or possibly something someone made?

You do fantastic work! I guess you are not one of "the faint of heart". Kudos! Tom Angell Falls Church, Virginia

I somehow did not attach a photo earlier.

Note the reason for bushing out the head stock as well was to enable me to bore out the carriage from through the headstock leadscrew hole. I moved the carriage up as close to the headstock as I could

Sorry....... this should show what you are interested in The leadscrew in operation has an extra bit on the other side of the bush collar, which I have slotted and added a clamp to. This provides a

We have talked a lot about handwheels and Unimat leadscrew conversions.? Here is one that I got from someone's collection.? It belonged to Charlie Brommer, who made model train parts as CHB.? This

I seem to be able to enlarge the picture on my iPhone 14. For me, the detail is not visible due to lack of focus/resolution in the picture. The description and picture are good enough to make it

Bob, The detail is not able to be viewed as it is not able to be enlarged. Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/

Yes I did do a replacement threaded lead screw as part of a threading setup that I made. Not for the faint hearted ! I ended up bushing both the carriage and the headstock. I now have 4 leadscrews two

We have gone on for some time on this subject. Are there photos/instructions anywhere as to how to convert the lead and cross-slide screws to inch type?? The Unimat lead screw is 8mm.? Do you use a

Do the same with the cross slide. Then all will be in sync. -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

Better yet, install an Imperial lead screw and matching nut to be absolutely on the money. Dick -- http://www.homemadetools.net/ forum/ OFF-

Hi Gang: I remember the consignment area and have bought and sold stuff there. It was different from the clearance area. Here is a map of the Expo Center: Grounds Map The view is south at the

What Carl has called the clearance room is consignment sales.? You can bring whatever you want to sell.? They charge 20% up to $100, then 15%. The show opens 9am Friday.? Now if you want to buy

Hi Peter: It hasn't been too dangerous to my wallet in the past. Mostly bargains: working resistance solder machine for a dollar, a small lathe (that I gave to our local maker group), flexible