开云体育

Hello Bill, could you send me the details to join Mini-Mills group please. Phill

Hello Julius, The gear box on this U3 is powered from the head spindle with a rubber belt and it has a disconnect on the end of the box you push it in to drive, pull out to stop, so you have full

Look at the Mini-Mills group, which I own, and can send you an invite to join, if interested. They have a few things about add powerfeeds to mills, which can be applied with a little skull sweat to

Hello: @Phill005 Yes, so do I. But it is rather a hassle to use. Belts (o'rings actually) stretch too easily and slip, interrupting the cut. Even if you use the right OEM spec. ie: 2-222/N674-70 Are

Saw blades for the Unimat fret saw are available in most big box stores such as Menards and Home Depot. ?Also known as coping saw blades. Dick -- http://www.homemadetools.net/ forum/ OFF-

Hello Neil: I received Clive's files but I checked and yours are perfectly accessible. No problems. Thank you. Best, JHM

Hello Clive: Yes. And received perfectly. Thank you for that. Best, JHM

Neil,? many thanks for the link to the mags, this is something I have been interested in doing for my U3 that i am restoring although I do have a Emco power feed on mine but you have to change the

You can't download them? Neil [email protected]> wrote:

Hi Clive, I would also be very interested in a copy of these articles if that is possible please?

John, I understand your approach to tooling and that works for you and is great. I on the other hand enjoy grinding tools and making cutters. Different strokes for different folks. The only cutters I

If I've done it right you should be able to download both mags here. If not, I'll have to try again!! The link expires on Nov 29th. https://k00.fr/fdpjl7om Neil ----- [email protected]> wrote:

Sent!

Hello: I meant to write sawbona@ ... ( sawbona@... ) Best, JHM * why can't we be allowed to edit our posts?

Hello: That would be wonderful 8^D ! My address is sawbona@.... Thank you very much. Best, JHM

My address is johnhutnick@... Thanks again. [email protected]> wrote:

Julius and John,? You're welcome to the articles. The PDFs are of individual issues so rather than trying to screenshot the articles it's easier to send the whole issue - who knows; there might be

I would also appreciate a scan.? Thanks for any help

Hello: Indeed ... The issue with the "Unimat 3 Split Nut Lead Screw Clutch" article is from 07/2005 (#107 p.44) and issue with the "Friction Dial Handwheels for the Unimat 3" article (photo I posted)

As luck would have it I have MEW in PDF formal - I must look up those issues. Thanks for the heads-up Clive