开云体育

The dc motors I have used for my unimats usually came with a flat on their shaft. I just drilled and tapped through the pulley for a small set screw ( like 4-40). The set screw bears on the flat. One

Cutting a key slot into the Unimat's relatively thin spindle wall strikes me as a bad idea. Besides, with round belts the belt will slip in the pulley before the pulley slips on the spindle. My 2?,

Hi Folks. think I’m gonna repower my DB200 with a new motor thinking brushless, dc, 12-24V pondering wattage. 150w sounds good. two much power creates problems as does too little. was also thinking

Since I have an ultrasonic cleaning tank, I would clean it that way... Harbor Fright sells the one I have -Guy-

Just fantastic work. Beautiful to just look at. I had to make a similar dovetail for a tool holder I needed for my Maximat but I used a shaper that I own. Don’t see those around shops much any more.

Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

Paul, I enjoyed looking at your website! Very interesting! Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/

Mike, What are those white gears seen in the background of your picture used for? Just curious! Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972

Carl, Nice way to solve a problem! Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

More precisely M7 × 0.635

Kudos! Really brilliant work. Great craftsmanship and ,artery of the tool. I am in awe. Tom A

I used the Unimat to build a Quick Change tool post for it. /g/Unimat/photo/195708/2246513?p=Created%2C%2C%2C20%2C2%2C0%2C0 (

Nice job, Carl! -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

Find a 5/16" or 8mm bottle brush. Nylon bristles will be easier on the alloy parts. If you're in the US, you can find this set at Harbor

Test tube cleaning brushes. They come in several diameters. After a good soak in a degreaser these should clear out any leftover swarf. Elliot -- Elliot Nesterman elliot@... www.ajoure.net "The

Hey there has anyone broken down their cross slide on a DB/SL lathe. I mean the saddle that slides across the “y” axis and the threaded drive rod out? if so, how did you clean the part through

Also added photo's of 3 different milling collumns. Even the bottems are different in shape. 4 photo's from the MK1 - MK2 - MK3/4 - and a Zamak bottem.

Yes. I realized that I inverted my math. I realized that .275-40 is approx M7-.625

My? Sherline lathe works with metric collets as long as I use the metric sized collet sleeve, but the Sherline collets will not thread onto my Boley drawbar.? The threads are a bit larger in

Yes to your last question, anyway. :) 1mm pitch is 25.4tpi. I'd have to dig out a copy of Machinery's Handbook or other reference to calculate it.? Bill in OKC? William R. Meyers, MSgt, USAF(Ret.)