|
TBF Thats about all a Unimat is worth ! Id say ?50 is about on the money. I have NO IDEA why people pay Hundreds for this little lathe. Its Crazy
On Tuesday, 10 September 2024 at 19:19:39 BST, Alan Ehrlich <alan.ehrlich@...> wrote:
Fret saw: beware, there are at least two different size eccentrics, depending on which saw you have, earlier or later First found that out when I purchased one online for my early saw and turned out it didn¡¯t fit because it was for the later one. ?Friendly regards,? Alan On 10 Sep 2024, at 19:59, Andrei <calciu1@...> wrote:
If that is the case, you have to change your name from "Quick" to "Almost on time"
???
From: [email protected] <[email protected]> on behalf of James Quick via groups.io <quickj@...>
Sent: Tuesday, September 10, 2024 1:34 PM To: [email protected] <[email protected]> Subject: [Unimat] Looking for some help. ?
I know you all are going to hate me for this, but I was able to purchase a Unimat Jigsaw/fret saw at an estate sale for $4.00 and a Unimat Table saw at the same sale for $3.00 (I later found the fence, miter gage, and blade guards in different rooms for
$.50 each so $4.50 total).? I was unable to locate the eccentric drive for the jigsaw or the blade arbor for the table saw anywhere, so I need to make them.? I also could not find the Mounting bar for the table saw.
?
I have seen the drawings that are in the files section for the Table saw arbor, and the ones that are there for the eccentric, but I am wondering if anyone would be willing to take a couple of photos of the actual eccentric and provide the measurements
(I would like the original one that is counter balanced) Also the Center-to-center distance between the spindle center and drive pin center, which I think is 5mm?? If anyone has pictures or drawings of the table saw mounting bar I would appreciate it.
?
Thanks in advance!
?
BTW, there was a Unimat lathe, and boxes of Unimat accessories at this sale that I was unable to get because they were sold by the time I got in the door.? The Unimat lathe went for $65.00 and most accessories were $3.00 each
?
<TableSaw.jpg> ?
<fretsaw2.jpg> <FretSaw.jpg> ?
Jim in Minnesota
|
