Re: DB/SL Belt Sizes?

John Entwistle · 2024-06-17T13:13:50-07:00

how do you stick the ends together I’ve not had much success with “o ring” kits Best Regards John

John Entwistle All Messages By This Member #63202 开云体育 how do you stick the ends together I’ve not had much success with “o ring” kits Best Regards John toggle quoted message Show quoted text On Jun 17, 2024, at 4:02?PM, byron williams <bdkwilliams@...> wrote: ? Hi guys I used to buy o rings belt properly made belts, then the ? came on!! I now buy 5-6mm polypropylene from any plastic company on line, cut it and melt it together any length,? A bit of a job to start off, but after a bit I got it to work fine? I now have belts for any combination including the power feed Byron On 17 Jun 2024, at 20:01, Andrei <calciu1@...> wrote: ? Those sizes sound very small. My SL1000 uses a? 341 O-ring. The size you quote is very far off what I saw on my lathe.? Best Regards, *Andrei* mailto:calciu1@... ? ? From: [email protected] <[email protected]> on behalf of MtnMike <ssullivan556@...> Sent: Monday, June 17, 2024 12:15 AM To: Jeff Klender <jeffklender2003@...>; [email protected] <[email protected]> Subject: Re: [Unimat] DB/SL Belt Sizes? ? After trying many o-ring sizes I ended up with the following to fit my DB200: -227 small drive -237 large drive My lathe came with a single o-ring that would work on one of the motor pulleys and the matching spindle pulley. This was: -241 skip idler Happy turning!

Join [email protected] to automatically receive all group messages.

开云体育