¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Unimat
  2. Messages
Single Messages Topics Expanded Polls

Re: Recommendations for learning the basics

 

Amen to that!?

Bill in OKC?

William R. Meyers, MSgt, USAF(Ret.)

Aphorisms to live by:
Good judgement comes from experience. Experience comes from bad judgement.?
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better.
Expect in one hand, expectorate in the other. See which one gets full first.



On Sunday, May 12, 2024 at 07:55:09 AM CDT, Andrei <calciu1@...> wrote:


Don't be afraid to make mistakes. I learned my best lessons from my own fuckups.

Get

From: [email protected] <[email protected]> on behalf of OldToolmaker via groups.io <old_toolmaker@...>
Sent: Sunday, May 12, 2024 8:38:37 AM
To: Brad Barton <[email protected]>; [email protected] <[email protected]>
Subject: Re: [Unimat] Recommendations for learning the basics
?

Brad,
Start by reading the original manual cover to cover. Don¡¯t rush into anything and think you know everything. Go slow.
Watch videos. Ask questions on this group. You will find many members here that have gone before you.?

Dick
http://www.homemadetools.net/ forum/?OFF- SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI- LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
Join [email protected] to automatically receive all group messages.