|
Andrei
¿ªÔÆÌåÓýGuys, there is no, none, nada, zero difference between white, red, black buna-n o-rings.?
Just buy what you find when you need it.?
The color is just decorative.
Andrei
Get From: [email protected] <[email protected]> on behalf of Jkle379184 via groups.io <jkle379184@...>
Sent: Saturday, July 15, 2023 11:02:25 AM To: [email protected] <[email protected]> Subject: Re: [Unimat] Question for you guys that are tech savvy ?
I inclosed a O ring Standard chart that you can down load. I checked the Jet Gasket company's web site and I am not seeing the white O rings, they do still sell the black ones and they are $3.68 for 20 of them.
Jeff
On Saturday, July 15, 2023 at 10:54:51 AM EDT, Jkle379184 via groups.io <jkle379184@...> wrote:
I found two of the packages, one is " -339? Oring 70 DURO WHITE FDA NBR" and the other is " -334 ORING 70 DURO WHITE FDA NBR". These are a standard size 3/16" cross section O rings. The company name on the packages packages that I have is Jet
Gasket & Seal. I got white at the time, they also come in black and red. The important data is the size -334 and -339 , and Duro 70. I got two packages of 5 and I am still using the original one.
?Jeff
On Saturday, July 15, 2023 at 10:30:02 AM EDT, Andrei <calciu1@...> wrote:
Boatloads of o-rings here. I buy small ones to hold my cadence sensor on the left pedal crank on my bike.?
Measure with a string around your pulling and buy the nearest size down.
Andrei
Get
From: [email protected] <[email protected]> on behalf of Jkle379184 via groups.io <jkle379184@...>
Sent: Saturday, July 15, 2023 10:24:43 AM To: [email protected] <[email protected]> Subject: Re: [Unimat] Question for you guys that are tech savvy ?
I got them on Ebay a few years ago, they are? a standard size O ring. I will check my notes to see if I wrote down the O ring sizes.
?Jeff
On Saturday, July 15, 2023 at 09:23:12 AM EDT, OldToolmaker via groups.io <old_toolmaker@...> wrote:
Hello Jeff,
Where do you purchase your white buna belts? Dick -- http://www.homemadetools.net/ forum/?OFF- SET-tailstock-center-65965#post105972 ?SMALL TURRET TOOL POST PLANS? ?LARGE TURRET TOOL POST PLANS ?MINI- LATHE CARRIAGE LOCK PLANS ?SMALL QC TOOL POST PLANS? ?QUICK CHANGE LATHE TURRET ?MINI LATHE COMPOUND PIVOT MODIFICATION |
