Take the way bars off and check them for straightness? ?Maybe try them the other way up? ?Or even turn one around?
I¡¯m not an expert on this, just thinking of easy things to check.
My first thought was maybe the base is bent, and maybe then clamp it down with something thin underneath in the middle, and measure the straightness somehow as you slowly tighten the clamps to straighten the base, but I¡¯m way out of my depth here.
toggle quoted message
Show quoted text
On 22 Jun 2023, at 15:17, Quinn Golden <quinngolden@...> wrote:
?I am presuming the drill was mounted in the tail stock. If you can duplicate the set up, and the drill wanders downhill, repeat the set up and rotate the drill 90¡ã and see if it wanders in that direction. ? ?I suspect the drill bit is your challenge and not the machine. ?
