Re: Mill Question - should I? or shouldn't I
John Entwistle
Best Regards
John
On Apr 22, 2023, at 5:13 PM, Jkle379184 via groups.io <jkle379184@...> wrote:
?
How about something like this, a 12" metal shear, roller and brake all in one. It would do a what you want and more. This is a Eastwood brand. They are sold under many different names and with a big price spread. Just do a web search for " 12 inch 3 in 1 Metal Fabrication Brake Shear and Slip Roll"
https://www.eastwood.com/eastwood-12-inch-3-in-1-brake-shear-and-slip-roll.html
Jeff
-----Original Message-----
From: Bill in OKC too via groups.io <wmrmeyers@...>
To: [email protected] <[email protected]>
Sent: Sat, Apr 22, 2023 1:38 pm
Subject: Re: [Unimat] Mill Question - should I? or shouldn't I
From: Bill in OKC too via groups.io <wmrmeyers@...>
To: [email protected] <[email protected]>
Sent: Sat, Apr 22, 2023 1:38 pm
Subject: Re: [Unimat] Mill Question - should I? or shouldn't I
Tamra, a shear will be easier, and there won't be lots of fine metal dust to worry about. Though you can get some pretty sharp edges shearing metal.?
You can get a pretty decent hand-held band saw from Harbor Freight. I've got the older version from before they introduced their new Bauer line. Cost about $100, and the newer Bauer version does a wider and deeper cut for $99 right now. There are a number of folks who have built stands to use them as bench tools for horizontal or vertical use.?https://m.youtube.com/results?sp=mAEA&search_query=bandsaw+stand+portable? some links for you.?
I have several hand shears, and a roller sheet that will cut up to 1/8" plate.
William R. Meyers, MSgt, USAF(Ret.)
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better.
Aphorisms to live by:
Good judgement comes from experience. Experience comes from bad judgement.?
SEMPER GUMBY!
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better.
Expect in one hand, expectorate in the other. See which one gets full first.
On Saturday, April 22, 2023 at 12:47:48 AM CDT, Tamra B <tamrabrogdon@...> wrote:
Kevin, I think this is a much safer solution... I have one that I use all the time at work.? I will order the copper and see if I can cut it with it;? I do have a few saw blades from my micro mark table saw.... oh, and looking this up, they do indicate you can cut brass up to 1/16".??
.
Lots of options here....
Sometimes, I wish for a real metal cutting bandsaw for steel, but so far, one has not landed in the shop.? I am not permitted to use dear husbands woodworking tools on metals... that will get me kicked out of the shop; but I can do this on my micromark table saw if the paper cutter doesn't work.
Tamra
.
Lots of options here....
Sometimes, I wish for a real metal cutting bandsaw for steel, but so far, one has not landed in the shop.? I am not permitted to use dear husbands woodworking tools on metals... that will get me kicked out of the shop; but I can do this on my micromark table saw if the paper cutter doesn't work.
Tamra