开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Ui-view wx setup question


 

I'm setting up the weather station in ui-view using my LaCrosse ws-2812u-it station.? I've used it for years with Heavy Weather Pro but recently lost the hard drive on the computer I was using.? I'm now installing on a new computer and ui-view and Heavy weather both working but the wx.txt file called for in the setup is not found.? How do I set or create this file?...thank you..wa2nan..Kerry
--
Sent from Outlook Email App for Android


 

Your Heavy Weather Pro software needs to create the file. I did briefly look at the HWP manual but did not find the information. However, once the file is created, you will need to know where the file is stored on your hard drive. Then in UI-View, under Setup > Wx Station Setup under the WX data file, you need to enter the path and name for the file create by HWP.

Hope this helps you get it going again.

Monty Wilson, NR0A/AP677

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of kerry
Sent: Tuesday, May 18, 2021 03:50 PM
To: [email protected]
Subject: [UI-View] Ui-view wx setup question


I'm setting up the weather station in ui-view using my LaCrosse ws-2812u-it station. I've used it for years with Heavy Weather Pro but recently lost the hard drive on the computer I was using. I'm now installing on a new computer and ui-view and Heavy weather both working but the wx.txt file called for in the setup is not found. How do I set or create this file?...thank you..wa2nan..Kerry
--
Sent from Outlook Email App for Android


 

Thanks Monty,
From what little information I can find it says it should be a .txt file.? I've uninstalled and re-installed heavy weather pro about three times and it installs into program files.? I search the folder and the computer for the wx file and can't seem to find it.? I'll keep plugging away...tnx...
--
Sent from Outlook Email App for Android Tuesday, 18 May 2021, 06:59PM -04:00 from "Monty Wilson, NR0A" jwilson16@... :

Your Heavy Weather Pro software needs to create the file. I did briefly look at the HWP manual but did not find the information. However, once the file is created, you will need to know where the file is stored on your hard drive. Then in UI-View, under Setup > Wx Station Setup under the WX data file, you need to enter the path and name for the file create by HWP.

Hope this helps you get it going again.

Monty Wilson, NR0A/AP677

-----Original Message-----
From: [email protected]< [email protected]> On Behalf Of kerry
Sent: Tuesday, May 18, 2021 03:50 PM
To: [email protected]
Subject: [UI-View] Ui-view wx setup question


I'm setting up the weather station in ui-view using my LaCrosse ws-2812u-it station. I've used it for years with Heavy Weather Pro but recently lost the hard drive on the computer I was using. I'm now installing on a new computer and ui-view and Heavy weather both working but the wx.txt file called for in the setup is not found. How do I set or create this file?...thank you..wa2nan..Kerry
--
Sent from Outlook Email App for Android










 

Maybe a note to LaCrosse would be worthwhile. Sorry I couldn't help with Heavy Weather. I use a different software, Weather Display.

Cheers

Monty Wilson, NR0A/AP677
jwilson16@...

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of kerry
Sent: Tuesday, May 18, 2021 06:15 PM
To: [email protected]
Subject: Re: [UI-View] Ui-view wx setup question


Thanks Monty,
From what little information I can find it says it should be a .txt file. I've uninstalled and re-installed heavy weather pro about three times and it installs into program files. I search the folder and the computer for the wx file and can't seem to find it. I'll keep plugging away...tnx...
--
Sent from Outlook Email App for Android Tuesday, 18 May 2021, 06:59PM -04:00 from "Monty Wilson, NR0A" jwilson16@... :

Your Heavy Weather Pro software needs to create the file. I did briefly look at the HWP manual but did not find the information. However, once the file is created, you will need to know where the file is stored on your hard drive. Then in UI-View, under Setup > Wx Station Setup under the WX data file, you need to enter the path and name for the file create by HWP.

Hope this helps you get it going again.

Monty Wilson, NR0A/AP677

-----Original Message-----
From: [email protected]< [email protected]> On Behalf Of kerry
Sent: Tuesday, May 18, 2021 03:50 PM
To: [email protected]
Subject: [UI-View] Ui-view wx setup question


I'm setting up the weather station in ui-view using my LaCrosse
ws-2812u-it station. I've used it for years with Heavy Weather Pro but
recently lost the hard drive on the computer I was using. I'm now
installing on a new computer and ui-view and Heavy weather both working
but the wx.txt file called for in the setup is not found. How do I set
or create this file?...thank you..wa2nan..Kerry
--
Sent from Outlook Email App for Android










 

I use Weather Display also and in the setting section you have to tell the software to create the WXNOW.TXT file and where to put it
Not familiar with Heavy weather so look carefully in any setup section

--
John Mc Hugh, K4AG
Coordinator for Amateur Radio
National Hurricane Center, WX4NHC
Home page:-

On 5/18/2021 7:14 PM, kerry wrote:
Thanks Monty,
From what little information I can find it says it should be a .txt file.? I've uninstalled and re-installed heavy weather pro about three times and it installs into program files.? I search the folder and the computer for the wx file and can't seem to find it.? I'll keep plugging away...tnx...
--
--
This email has been checked for viruses by AVG.


 

Hi All,

I too use Weather Display for my weather station using my Davis Vantage Pro2 plus .

UI-View works well with it.

I also have a weather web page, at www.dwayneyamato.com/wx/

Seems to be working well since 2004 when I moved from Illinois to Maui.

I was using Davis Vantage Pro in Illinois in the late 1990's with UI-View and Weather Display back then but not a web site until we moved here and upgraded to the current weather station.

Aloha,

--Stan Y.
KH6HHG
Maui, Hawaii

At 04:47 PM 5/18/2021, you wrote:
I use Weather Display also and in the setting section you have to tell the software to create the WXNOW.TXT file and where to put it
Not familiar with Heavy weather so look carefully in any setup section

--
John Mc Hugh, K4AG
Coordinator for Amateur Radio
National Hurricane Center, WX4NHC
Home page:-

On 5/18/2021 7:14 PM, kerry wrote:
Thanks Monty,
From what little information I can find it says it should be a .txt file.? I've uninstalled and re-installed heavy weather pro about three times and it installs into program files.? I search the folder and the computer for the wx file and can't seem to find it.? I'll keep plugging away...tnx...
--

--
This email has been checked for viruses by AVG.






 

Does anyone know if weather display will work with the LaCrosse 2800 series weather station and ui-view?
--
Sent from Outlook Email App for Android Wednesday, 19 May 2021, 02:04PM -04:00 from Stanley T. Yamato styamato@... :

Hi All,

I too use Weather Display for my weather station
using my Davis Vantage Pro2 plus .

UI-View works well with it.

I also have a weather web page, at www.dwayneyamato.com/wx/

Seems to be working well since 2004 when I moved from Illinois to Maui.

I was using Davis Vantage Pro in Illinois in the
late 1990's with UI-View and Weather Display back
then but not a web site until we moved here and
upgraded to the current weather station.

Aloha,

--Stan Y.
???KH6HHG
???Maui, Hawaii

At 04:47 PM 5/18/2021, you wrote:
I use Weather Display also and in the setting
section you have to tell the software to create
the WXNOW.TXT file and where to put it
Not familiar with Heavy weather so look carefully in any setup section

--
John Mc Hugh, K4AG
Coordinator for Amateur Radio
National Hurricane Center, WX4NHC
Home page:-

On 5/18/2021 7:14 PM, kerry wrote:
Thanks Monty,
From what little information I can find it
says it should be a .txt file.? I've
uninstalled and re-installed heavy weather pro
about three times and it installs into program
files.? I search the folder and the computer
for the wx file and can't seem to find it.? I'll keep plugging away...tnx...
--

--
This email has been checked for viruses by AVG.












 

Hi Kerry,

Check out this site: ,42619.msg347934.html#msg347934

Hope that this place will help.

Aloha,

--Stan Y.
KH6HHG
Maui, Hawaii

At 09:58 AM 5/19/2021, you wrote:
Does anyone know if weather display will work with the LaCrosse 2800 series weather station and ui-view? -- Sent from Outlook Email App for Android Wednesday, 19 May 2021, 02:04PM -04:00 from Stanley T. Yamato styamato@... : >Hi All, > >I too use Weather Display for my weather station >using my Davis Vantage Pro2 plus . > >UI-View works well with it. > >I also have a weather web page, at www.dwayneyamato.com/wx/ > >Seems to be working well since 2004 when I moved from Illinois to Maui. > >I was using Davis Vantage Pro in Illinois in the >late 1990's with UI-View and Weather Display back >then but not a web site until we moved here and >upgraded to the current weather station. > >Aloha, > >--Stan Y. >? ? ? KH6HHG >? ? ? Maui, Hawaii > >At 04:47 PM 5/18/2021, you wrote: > I use Weather Display also and in the setting > section you have to tell the software to create > the WXNOW.TXT file and where to put it > Not familiar with Heavy weather so look carefully in any setup section > > -- > John Mc Hugh, K4AG > Coordinator for Amateur Radio > National Hurricane Center, WX4NHC > Home page:- > > On 5/18/2021 7:14 PM, kerry wrote: >> Thanks Monty, >> From what little information I can find it >> says it should be a .txt file.?? I've >> uninstalled and re-installed heavy weather pro >> about three times and it installs into program >> files.?? I search the folder and the computer >> for the wx file and can't seem to find it.?? I'll keep plugging away...tnx... >> -- > > > -- > This email has been checked for viruses by AVG. > > > > > > > > > > > >


K Wesolowski KD7DFV
 

Can this VIS Reader be used as a stand-alone software solution or must it be
used in conjunction with Weather Display?

Kevin
KD7DFV

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Stanley T. Yamato
Sent: Wednesday, May 19, 2021 11:04
To: [email protected]
Subject: Re: [UI-View] Ui-view wx setup question

Hi All,

I too use Weather Display for my weather station using my Davis Vantage Pro2
plus .

UI-View works well with it.

I also have a weather web page, at www.dwayneyamato.com/wx/

Seems to be working well since 2004 when I moved from Illinois to Maui.

I was using Davis Vantage Pro in Illinois in the late 1990's with UI-View
and Weather Display back then but not a web site until we moved here and
upgraded to the current weather station.

Aloha,

--Stan Y.
KH6HHG
Maui, Hawaii

At 04:47 PM 5/18/2021, you wrote:
I use Weather Display also and in the setting section you have to tell
the software to create the WXNOW.TXT file and where to put it Not
familiar with Heavy weather so look carefully in any setup section

--
John Mc Hugh, K4AG
Coordinator for Amateur Radio
National Hurricane Center, WX4NHC
Home page:-

On 5/18/2021 7:14 PM, kerry wrote:
Thanks Monty,
From what little information I can find it says it should be a .txt
file.? I've uninstalled and re-installed heavy weather pro about
three times and it installs into program files.? I search the folder
and the computer for the wx file and can't seem to find it.? I'll
keep plugging away...tnx...
--

--
This email has been checked for viruses by AVG.






 

Hi Kevin,

As long as if it can produce the WXNOW.TXT file that UI-View can use.

Aloha,

--Stan Y.
KH6HHG
Maui, Hawaii