Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- UI-View
- Messages
Search
|
rule off 8
"PE1RDW (Andre)" <[email protected]
Hi All
The first crashing digi because of breaking the rule of 8 has been found PA0HWB-2 has gone down by some frames comming from england via belgium PA0HWB-2 is running stealth digi on BPQ, we're not sure if it is the digi software or BPQ that stops working It is a reception problem so it's not stealth digi that let it grow to long (what digi is the problem is unknow) I hope it can be fixed as PA0HWB-2 is the only link to belgium and most of the time england 73 de Andre PE1RDW |
|
Re: UIPath DDE Error
"fnorton2" <[email protected]
Hi Andy,
toggle quoted message
Show quoted text
Just scanning through the messages and saw this, I have recently upgraded to UI-View 2.16b and Winpack v 6.5 and came up again with that same message! The same cure worked again! Regards Fred fnorton2@... -----Original Message-----
From: Andy Pritchard <apritch@...> To: ui-view@... <ui-view@...> Date: 06 January 2000 18:22 Subject: Re: [ui-view] UIPath DDE Error Hi Ev |
|
FW: [htaprs] Re: MicE Repeaters/THD7
Ciemon G0TRT
73......Ciemon Dunville G0TRT email: g0trt@...
toggle quoted message
Show quoted text
Loc: 5207.25N 00058.23E www:http:/go.to/APRSUK Tel: +44 (0)7715 104275 ICQ: 6263612 -----Original Message-----
From: bounce-htaprs-10994@... [mailto:bounce-htaprs-10994@...] On Behalf Of Bob Bruninga Sent: 06 January 2000 16:37 To: TAPR Hot Technology APRS Cc: htaprs@... Subject: [htaprs] Re: MicE Repeaters/THD7 On Thu, 6 Jan 2000, jsr wrote: What the heck is a Mic-Lite? Is that like a Bud Lite, Same great featuresYep, the Mic-Lite is a complete AX.25 TNC transmitter on a 1 by 1.7 inch micro miniature board that is capable of sending 5 analog channels of telemetry and 8 data bits. It also sends a BText and GPS data if a GPS is attached to the serial port. It is so small, you can build it into most microphones! The Mic-Lite can operate in either the MIM Telemetry mode, or as a Microphone Encoder (Mic-E) to include GPS and telemetry data on the tail-end of a voice transmission. Included with the package is a file Mic-Lite.txt that shows you how to make a Mic-E with only 2 external diodes. Or you can add as many front panel switches to add more Mic-E functions such as PATH selection, MESSAGE selection, or variable PERIOD rate. The Mic-E is a way of adding this data to the tail-end of a voice transmission as soon as the PTT drops. It is $79 ea or $69 in 10 or more +$4 S&H... For details, see To see some Mic-Lites: Or download all the docs from tapr.org/aprssig/dosstuff/APRSdos and get the MIM.ZIP file... de WB4APR,Bob --- You are currently subscribed to htaprs as: g0trt@... To unsubscribe send a blank email to leave-htaprs-10994E@... |
|
Re: THD7E
Ciemon G0TRT
Hi all,
toggle quoted message
Show quoted text
You can't use UI-View and the D7 with GPS as a "smart tracker", it doesn't work as it should. UI-View doesn't see the data from the GPS via the D7. I've played with it a lot and had no success in getting this to work properly. It's possible to bodge it, but all you end up with is UI-View messaging with a dumb tracker. Whilst it "works" you can't use the UI-View "smart tracker" features i.e. tx timing. 73......Ciemon Dunville G0TRT email: g0trt@... Loc: 5207.25N 00058.23E www: Tel: +44 (0)7715 104275 ICQ: 6263612 -----Original Message-----
From: babel [mailto:babel@...] Sent: 06 January 2000 14:59 To: UIVIEW Subject: [ui-view] THD7E Hi all. I still can't get my THD7E working with GPS and UI-VIEW successfully. I've followed previous advice from Roger and others with little progress. I expect to see my mobile icon when moving and receiving my valid GPS data connected to the THD7E but all I see is my home position. I do have enabled a short mobile beacon interval 2mins. If I disable the home beacon interval I still do not appear mobile. Help please! Below is a 'dump' of what I see in the terminal window, which proves the GPS is talking through the Kenwood radio and is being 'seen' by UI-VIEW v2.16b. bbRAM loaded with defaults TASCO Radio Modem AX.25 Level 2 Version 2.0 Release 08/18/98 2Chip ver 1.00 Checksum $F0 cmd:CONOK OFF CONOK OFF CONOK was ON cmd:LOC E 5 LOC E 5 LOCATION was EVERY 0 cmd:LTMON 5 LTMON 5 LTMON was 0 cmd:BEACON EVERY 0 BEACON EVERY 0 BEACON was EVERY 0 cmd:MYCALL G7KCV-1 MYCALL G7KCV-1 MYCALL was NOCALL cmd:UNPROTO CQ MY G7KCV-1 MYCALL was G7KCV-1 cmd:PORTO $0000 PORTOUT was $0000 cmd:G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185159,5243.356,N,00206.727,W,35,2.0,0, ,000,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185209,5243.360,N,00206.723,W,35,2.0,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185213,5243.361,N,00206.721,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185219,5243.363,N,00206.719,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185223,5243.364,N,00206.717,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185229,5243.367,N,00206.717,W,35,1.6,0,,000 ,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185233,5243.366,N,00206.714,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185239,5243.367,N,00206.711,W,35,1.6,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185243,5243.368,N,00206.710,W,35,1.6,0,,000 ,1*2F --------------------------- ONElist Sponsor ---------------------------- GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU! Tired of filling out forms and remembering passwords? Gator fills in forms and passwords with just one click! Comes with $50 in free coupons! <a href=" ">Click Here</a> ------------------------------------------------------------------------ |
|
Re: THD7E
Roger Barker <[email protected]
In article <002901bf5856$be917a20$0300a8c0@libretto>, babel
<babel@...> writes Hi all.[snip] G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000Etc... UI-View doesn't understand $PNTS, because it's not something that a mobile would normally transmit. You need to configure the TH-D7E GPSTEXT parameter to an NMEA sentence that UI-View does understand, try adding "GPSTEXT $GPRMC" to the CMD file. I *think* it should then work, but I can't test it because Kenwood UK took my loan TH-D7E back a few months ago. :-( -- Roger Barker, G4IDE roger@... Boston Lincolnshire, UK |
|
Re: UIPath DDE Error
Andy Pritchard
Hi Ev
toggle quoted message
Show quoted text
One station had this problem and this was there solution to it... === making a UI-Path.INI file on Notepad with my callsign on, followed by two lines of XXXXX and inserting this in UI-View. To my amazement it worked, now I have upgraded to v1.5 there seem to be some extra features, have you made a new help file for this upgrade? If you have I would appreciate a copy. ----- Original Message -----
From: Ev Tupis (W2EV) <propnet@...> To: UI-View Listserv <ui-view@...> Sent: Thursday, January 06, 2000 2:36 PM Subject: [ui-view] UIPath DDE Error I just downloaded UIPath from OneList, installed it, and attempted to |
|
Re: Anyone within range of G8UAQ?
Andy Pritchard
Hi Roger
toggle quoted message
Show quoted text
Trying him on 800 this is your path to me, noteing G8UAQ G3NHF*,G7WBB-4*,G8UAQ-4*,M1BGY-4*,GW4GTE* ----- Original Message -----
From: David Lees <g0pdl@...> To: <ui-view@...> Sent: Thursday, January 06, 2000 8:43 AM Subject: Re: [ui-view] Anyone within range of G8UAQ?
|
|
Re: THD7E
Ian Wade <[email protected]
In article <002901bf5856$be917a20$0300a8c0@libretto>, babel
<babel@...> writes G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000 Is "$PNTS" a standard NMEA sentence? I haven't seen it before. 73 Ian, G3NRW -- +-----------------------------------------------------------------+ | APRS on 144.800 [IO91SX] ~55km/35 miles NNW of London | | email: g3nrw@... | | | | APRS PROTOCOL SPEC: +-----------------------------------------------------------------+ |
|
Re: Icon-Callsign Display Options
Roger Barker <[email protected]
In article <3874A4FF.3C8BCC75@...>, Ev Tupis (W2EV)
<propnet@...> writes I was asking about displaying icons without their associated callsignI'll put an option in the next update to turn off all the labels. -- Roger Barker, G4IDE roger@... Boston Lincolnshire, UK |
|
THD7E
"babel" <[email protected]
Hi all.
I still can't get my THD7E working with GPS and UI-VIEW successfully. I've followed previous advice from Roger and others with little progress. I expect to see my mobile icon when moving and receiving my valid GPS data connected to the THD7E but all I see is my home position. I do have enabled a short mobile beacon interval 2mins. If I disable the home beacon interval I still do not appear mobile. Help please! Below is a 'dump' of what I see in the terminal window, which proves the GPS is talking through the Kenwood radio and is being 'seen' by UI-VIEW v2.16b. bbRAM loaded with defaults TASCO Radio Modem AX.25 Level 2 Version 2.0 Release 08/18/98 2Chip ver 1.00 Checksum $F0 cmd:CONOK OFF CONOK OFF CONOK was ON cmd:LOC E 5 LOC E 5 LOCATION was EVERY 0 cmd:LTMON 5 LTMON 5 LTMON was 0 cmd:BEACON EVERY 0 BEACON EVERY 0 BEACON was EVERY 0 cmd:MYCALL G7KCV-1 MYCALL G7KCV-1 MYCALL was NOCALL cmd:UNPROTO CQ MY G7KCV-1 MYCALL was G7KCV-1 cmd:PORTO $0000 PORTOUT was $0000 cmd:G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185159,5243.356,N,00206.727,W,35,2.0,0, ,000,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185209,5243.360,N,00206.723,W,35,2.0,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185213,5243.361,N,00206.721,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185219,5243.363,N,00206.719,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185223,5243.364,N,00206.717,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185229,5243.367,N,00206.717,W,35,1.6,0,,000 ,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185233,5243.366,N,00206.714,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185239,5243.367,N,00206.711,W,35,1.6,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185243,5243.368,N,00206.710,W,35,1.6,0,,000 ,1*2F |
|
UIPath DDE Error
Ev Tupis (W2EV)
I just downloaded UIPath from OneList, installed it, and attempted to
execute it from under the File menu of UI-View. I get an error message that reads, "Unable to establish a DDE link to UI-View" and the window closes. I've looked through the documentation for UIPath, but nothing seems to jump out at me as to the culprit. I am running UI-View in "None" mode and no WinPak, if that helps at all. Any thoughts? Ev, W2EV -- PropNET: A digital wireless data network designed to plot band openings in near real-time. Intreagued? |
|
Re: Icon-Callsign Display Options
Ev Tupis (W2EV)
I was asking about displaying icons without their associated callsign
because of the volume of users in my area. Thanks to Roger's suggestion . . . . . . I've succeeded in un-cluttering my screen. I simply set font-sizeMay I change the font/size of the callsign text?Yes, right-click on any symbol and select the Font option. to 0 and enough real-estate on the background map peaks through, that I can tell who is where again. If I want more information on a particular icon, I double-click on it. Not a perfect solution, but a good work-around. FYI to the group. Ev, W2Ev -- PropNET: A digital wireless data network designed to plot band openings in near real-time. Intreagued? |
|
Re: Icon-Callsign Display Options
Roger Barker <[email protected]
In article <38747D2C.FB9F9CBB@...>, Ev Tupis (W2EV)
<propnet@...> writes No. May I change the font/size of the callsign text?Yes, right-click on any symbol and select the Font option. Small Fonts 6 point Regular works quite well. Owing to one of the great mysteries of Windows, if you select Small Fonts 5 point, it changes it to 4 point, and that is too small. May I make the white background of the callsign display transparent?Right-click on a symbol and use the Colours options. Transparent isn't an option. -- Roger Barker, G4IDE roger@... Boston Lincolnshire, UK |
|
Icon-Callsign Display Options
Ev Tupis (W2EV)
I have a TON of APRS traffic displaying. So much that it is difficult
to see the map behind all the icons. (such a problem to have...I know <g>). Is there an option that allows me to display only the icon and not display the callsign of the received station? May I change the font/size of the callsign text? May I make the white background of the callsign display transparent? Ev, W2EV -- PropNET: A digital wireless data network designed to plot band openings in near real-time. Intreagued? |
|
Re: Anyone within range of G8UAQ?
David Lees
Roger, can't you add him yourself. I run a couple of
lists from onelist and I have added people in the past. David. ===== -- David Lees G0PDL Solihull West Midlands __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. |
|
Re: KPC3+ and KISS problem
Ev Tupis (W2EV)
Ken said:
The expire time can be set by the user from Setup - Miscellaneous.Another good tip! Thanks for sharing the insight. I'm in the process of writing an article for a couple of ham magazines where this information is important to know. btw...the articles are about Meteor Scatter and propagation study work using UIPacket radio (see link below), where one would want an expire time of "0" and "something other than 0" respectively. Warmly, Ev, W2EV -- PropNET: A digital wireless data network designed to plot band openings in near real-time. Intreagued? |
|
Anyone within range of G8UAQ?
Roger Barker <[email protected]
If anyone is within range of G8UAQ (he uses GB7NND, but I'm not sure
where that is) could they send him a message to subscribe to this list again? I accidentally clicked the wrong button and denied his original subscription, and I don't think my packet messages telling him to subscribe again are reaching him. -- Roger Barker, G4IDE roger@... Boston, UK |
|
Another Overlay update
Karl G6ODT
The station overlays have been updated again.
The main one now shows 406 stations all received via RF Excluding any IGated stations that were received. The overlays were generated automaically from nearly 37Mb of logfiles. If your station details are wrong then update your beacon and the next time you beacon appears this end you will be updated in the following Overlay. 73 Karl G6ODT g6odt@... 24hr Digi 144.800 Relay,Wide,Irth,G6ODT |
|
General Staitons Overlay
Alan Hardiman
Hi All,
I am uploading the latest overlay Update stns18 to My One List Files G0FUM A few more stations added to the list making 234 to date. Again please may I draw your attention to a lot of missing data in the overlay. Missing data NAME of sysop QTH of station DIGIS operated BY the station Please chack your Beacon in the overlay and send me the missing or incorrect data so that I may update it. I am trying to keep the Overlay up to date but I need your help in supplying me the data to put in it. Any stations who are not indicated please send me the following dtat Your Name QTH What DIGI aliases you have set in digipeater Map Co-ordinates Thank you in advance. You can send me the details either via Packet or One List Address below Bye From:- Alan in Worthing England EMAIL= g0fum@... Amateur Radio = G0FUM@GB7IPW.#38.GBR.EU |
|
UI-VIEW baud Rate
"Adriano Migliari" <[email protected]
Roger
i am using a TNC PacComm model nb96.... that can run at 38.4 Baud rate. Using UI-VIEW i had to open the TNC and change the Baude rate switch from 38K to 19K. It would be possible, with next update, to make UI-VIEW running at 38K or higher??? ciaooooo Regards Adriano Migliari EMAIL: madriano@... AX25: IK2CBD@... JN45RQ Merate (LC) Italy |
to navigate to use esc to dismiss