开云体育

Yes it is,
73
Steve,听 KF6WAX

Yes - it goes to you, not the laptop.



Kevin W.

KD7DFV



From: ui-view@... [mailto:ui-view@...]
Sent: Monday, June 18, 2018 3:22 PM
To: ui-view@...
Subject: [UI-View] Need Reg code





I changed laptops...did a fresh install......it asks for the Registration
code......is my old registration transferable ??
Thanks
KG4VGH
Pete Parker

I changed laptops...did a fresh install......it asks for the Registration code......is my old registration transferable ??
Thanks
KG4VGH
Pete Parker

This coming weekend (16-17 June 2018) will be a "double-header" ham fest
weekend in Michigan.

On Saturday 16 June, I will be traveling to Midland Michigan (about 65
Miles/105Km nearly due north of my home QTH).听 I will depart about 0500 EDT
(0900 UTC) for this event that runs Saturday morning through around noon local.

Then on Sunday 17 June, I will be traveling to Monroe, Michigan (about 75
miles/120KM to the southeast in far southeastern Michigan, midway between
Detroit, MI and Toledo, Ohio. Again, I will depart around 0500 local EDT.听 This
event, (which is far larger than Midland since it draws from the Detroit metro
area and all of northwestern Ohio), usually breaks up around 1400 hrs local.


On both outings, I will be running test beacons on 60 meters APRS.听听 As before,
the setup will be:

* *5403.50 KHz USB* (US 60-meter "channel 5")
* *WA8LMF-6*听 beacon on standard *300-baud AX.25* packet APRS on 1600/1800 Hz
tones
* *WA8LMF-66* beacon on APRS Messenger *MFSK16 APRS* on 2100 Hz center tone.

I will have my home igate/mapping UI-Webserver running.听听 Goto

听听听 <>

and click on the black "Special Events Webserver" link.

-------------------------------------------------------------------------------

Stephen H. Smith听听听 wa8lmf (at) aol.com
Skype:听听听听听听听 WA8LMF
EchoLink:听 Node #听 14400听 [Think bottom of the 2-meter band]
Home Page:听听听听听听听听听

Live Off-The-Air APRS Activity Maps
听听 <>

Long-Range APRS on 30 Meters HF
听听 <>



[Non-text portions of this message have been removed]

The UI-View Group is very active. Most already do so,
but here are some some guidelines to follow.

1. Civility... this is practiced well by our members!

2. Sign your messages with your name and callsign.

3. Only post messages and responses that are relevant to UI-View.

4. Use plain text for messages sent to the UI-View support list.
When you address some 5000 recipients, you cannot know what their
email readers do with HTML formatted messages. Some will experience
unreadability.

5. IMPORTANT: When replying to a posting (message), kindly delete
all unnecessary text including the trailing text. Only leave the
poster's name, callsign and the time stamp, and the text from
the prior message about which you are commenting, and then trim
the rest. When viewing messages in the Yahoo web based interface,
the command [Up Thread] at the top of the message can be used, and
many email clients can group messages by thread also. Some members
have slow connections or pay for bandwidth. Brevity can often
also improve the clarity of your message. Do not top post... i.e.
do not type your reply above the quoted text.

6. When replying to a post, please decide if your comment should
go to the entire group of about 5000 or directly to the author.
Please think before replying to the group... replies like "I sure
do agree with that" do not add much to the group. Send thoughts
like those directly to the poster please.

7. Postings of sale or swapping of items are not wanted.

8. New members are all moderated for a number of postings. If the
messages follow the guidelines, they are approved and the member
is changed to un-moderated status.

This is a partially moderated list, i.e., only the user's first
messages are moderated, but all messages are monitored after posting.
If an un-moderated posting is found by the moderators to have a
problem, then the poster is changed to moderated status and in
most cases also contacted directly to resolve whatever has caused
the problem.

Actions are taken against those that chronically violate the rules.
The reason for this form of moderation is to block spammers from the
list and it is working well.

9. Do not add disclaimers to your posts that (1) restrict the ability
of other members to use the information you post, (2) claim a copyright
to your post, or (3) to claim any type of "rights" as a consequence of
another member replying to your post either directly to you or to the group.

10. Do not use anti-spam tools like challenge/response; the moderators
will not respond, and since messages to you then will bounce, you most
probably will be removed as a user of the group.

This message is sent to all new members, and to all members
every now and then. It has been revised as bounce reports have
changed a bit.

Any of us could experience no longer receiving email from the
UI-View support list. You might want to print this message and
review it if you stop receiving messages from the UI-View list.

If you stop receiving messages from the UI-View list, suspect
that either...

1) this or some other Yahoo group that you are a member of is
sending email which some spamblocker system regard as spam or
junk mail (quite a lot of these reports since summer 2009).

2) it may be that your email account has filled up with unread
messages or that the account on your mail server has ran out of
storage space. Read or delete the old messages on your mail server.

3) Some MSN or Hotmail accounts, and others such as arrl.net,
qsl.net which are used as a forwarding address from time to time
cannot forward to your primary address. When this hapens, the
Yahoo group receives an error message with something like
"impossible to relay to xxx" and you are then in the "bounced"
list. There are increasing numbers of bounces from some service
providers about messages which are blocked by them for policy
reasons.

4) You or your email provider have set up a challenge-and-response
system for those sending e-mail to you. The moderators will not
send replies to such challenges. You should select another
address for your list membership(s).

Sorry, but we cannot investigate every one of these blockings.
Please be aware that if you haven't received list messages
for some days, and reactivation requests are not reaching
you, or not answered by you, your account at the UI-View
list may be deleted. It may deleted if several bounces occur
in less than a week or two. It will also be deleted if the
bounce report says that your address is invalid, discontinued,
or unknown. Be aware that the bounce can relate to messages
from other lists than the UI-View list if you are a member
of other Yahoo groups.

If your membership is deleted, you will not be able to log
into the Yahoo group. If you try and send email to the group,
it will be rejected. However, you can subscribe again with a
valid and working email account by sending an empty email to
ui-view-subscribe@....

If you are away for some time, you might want to set your
account to temporarily receive only special messages or
even no email at all, but we recommend that still receive
special messages. You can log into the Yahoo group when you
return and change it back to daily digest or normal email.

Note: A member may send reactivation requests to himself/herself
from the Email Preferences section of My Groups.

73 and good luck - your UI-View group moderators

Yes, all the files are ok. If I put maps into the uiview maps directory they neither show on the list or load.

Google has announced a new Map Platform
<>
which imposes significant changes on the developers.

If you use my APRS maps for your personal BPQ or UI-VIEW web server: The
maps may disappear next month (June 2018):

73 de Gerhard, F5VAG
callsign at name dot paris

The UI-View Group is very active. Most already do so,
but here are some some guidelines to follow.

1. Civility... this is practiced well by our members!

2. Sign your messages with your name and callsign.

3. Only post messages and responses that are relevant to UI-View.

4. Use plain text for messages sent to the UI-View support list.
When you address some 5000 recipients, you cannot know what their
email readers do with HTML formatted messages. Some will experience
unreadability.

5. IMPORTANT: When replying to a posting (message), kindly delete
all unnecessary text including the trailing text. Only leave the
poster's name, callsign and the time stamp, and the text from
the prior message about which you are commenting, and then trim
the rest. When viewing messages in the Yahoo web based interface,
the command [Up Thread] at the top of the message can be used, and
many email clients can group messages by thread also. Some members
have slow connections or pay for bandwidth. Brevity can often
also improve the clarity of your message. Do not top post... i.e.
do not type your reply above the quoted text.

6. When replying to a post, please decide if your comment should
go to the entire group of about 5000 or directly to the author.
Please think before replying to the group... replies like "I sure
do agree with that" do not add much to the group. Send thoughts
like those directly to the poster please.

7. Postings of sale or swapping of items are not wanted.

8. New members are all moderated for a number of postings. If the
messages follow the guidelines, they are approved and the member
is changed to un-moderated status.

This is a partially moderated list, i.e., only the user's first
messages are moderated, but all messages are monitored after posting.
If an un-moderated posting is found by the moderators to have a
problem, then the poster is changed to moderated status and in
most cases also contacted directly to resolve whatever has caused
the problem.

Actions are taken against those that chronically violate the rules.
The reason for this form of moderation is to block spammers from the
list and it is working well.

9. Do not add disclaimers to your posts that (1) restrict the ability
of other members to use the information you post, (2) claim a copyright
to your post, or (3) to claim any type of "rights" as a consequence of
another member replying to your post either directly to you or to the group.

10. Do not use anti-spam tools like challenge/response; the moderators
will not respond, and since messages to you then will bounce, you most
probably will be removed as a user of the group.

This message is sent to all new members, and to all members
every now and then. It has been revised as bounce reports have
changed a bit.

Any of us could experience no longer receiving email from the
UI-View support list. You might want to print this message and
review it if you stop receiving messages from the UI-View list.

If you stop receiving messages from the UI-View list, suspect
that either...

1) this or some other Yahoo group that you are a member of is
sending email which some spamblocker system regard as spam or
junk mail (quite a lot of these reports since summer 2009).

2) it may be that your email account has filled up with unread
messages or that the account on your mail server has ran out of
storage space. Read or delete the old messages on your mail server.

3) Some MSN or Hotmail accounts, and others such as arrl.net,
qsl.net which are used as a forwarding address from time to time
cannot forward to your primary address. When this hapens, the
Yahoo group receives an error message with something like
"impossible to relay to xxx" and you are then in the "bounced"
list. There are increasing numbers of bounces from some service
providers about messages which are blocked by them for policy
reasons.

4) You or your email provider have set up a challenge-and-response
system for those sending e-mail to you. The moderators will not
send replies to such challenges. You should select another
address for your list membership(s).

Sorry, but we cannot investigate every one of these blockings.
Please be aware that if you haven't received list messages
for some days, and reactivation requests are not reaching
you, or not answered by you, your account at the UI-View
list may be deleted. It may deleted if several bounces occur
in less than a week or two. It will also be deleted if the
bounce report says that your address is invalid, discontinued,
or unknown. Be aware that the bounce can relate to messages
from other lists than the UI-View list if you are a member
of other Yahoo groups.

If your membership is deleted, you will not be able to log
into the Yahoo group. If you try and send email to the group,
it will be rejected. However, you can subscribe again with a
valid and working email account by sending an empty email to
ui-view-subscribe@....

If you are away for some time, you might want to set your
account to temporarily receive only special messages or
even no email at all, but we recommend that still receive
special messages. You can log into the Yahoo group when you
return and change it back to daily digest or normal email.

Note: A member may send reactivation requests to himself/herself
from the Email Preferences section of My Groups.

73 and good luck - your UI-View group moderators

On 4/22/2018 1:51 PM, chrisdg4kvi@... [ui-view] wrote:

I have even tried putting a map in to the maps folder which Uiview ignores
yet still shows the default maps. I wish I knew what I have done!!

Are you using a GPS device with UIview?

If so, If you have "Show Cross Hairs" checked in "Setup, GPS Setup",� and then
inadvertently hit "F12" ("Track Cross Hairs"), then UIview will always try to
select the highest-resolution map that covers your own (GPS) location. � No
matter what map you choose, UIview will almost instantly snap it back to IT'S
preferred map.� To stop this behavior, hit F12 again to toggle the "Track Cross
Hairs" function back off.

-------------------------------------------------------------------------------
Stephen H. Smith牋� wa8lmf (at) aol.com
Skype:牋牋牋� WA8LMF
EchoLink:� Node #� 14400� [Think bottom of the 2-meter band]
Home Page:牋牋牋牋�

Live Off-The-Air APRS Activity Maps
牋 <>

Long-Range APRS on 30 Meters HF
牋 <>

Chris G4KVI write鈥�

They have worked for years!! So at a lost to why it will not see any maps other than the default ones!

You might have 鈥済ot away with it鈥� by doing a 鈥渞un as administrator鈥�. Perhaps a Windows update caused it to revert to being a protected folder. Bite the bullet. Install it somewhere other than below Program Files.

Bill suggested refreshing Maps it鈥檚 worth a try, but things like this can be avoided by not installing below a protected folder.

--
73 Keith VE7GDH
鈥淚 may be lost, but I know exactly where I am! 鈥�

I have even tried putting a map in to the maps folder which Uiview ignores yet still shows the default maps. I wish I knew what I have done!!

I will keep looking. They have worked for years!! So at a lost to why it will not see any maps other than the default ones!

Stephen WA8LMF wrote鈥�

Can't do that with UIview32.ini. There are absolute path references in
鲍滨惫颈别飞32.颈苍颈鈥�

It鈥檚 a 鈥渢ext鈥� file. It can easily be edited with any text editor. Just do the installation. Close the program. Copy the original UIREG.BIN into the installation folder. Make a backup copy (or not) of the newly created uiview32.ini file and copy the old file into the new install folder. Open it in a text editor (EditPad is my favorite) and make whatever changes are needed.

Of course, it only takes a few minutes to enter your name, registration number, APRS validation number, position, symbol, location, beacon rate and path, sever(s) to use, filter and so on, so it isn鈥檛 that big a deal if you don鈥檛 keep copies of the old files.

--
73 Keith VE7GDH
鈥淚 may be lost, but I know exactly where I am!鈥�

Having trouble replying. I apologize if the message shows up 3 or 4 times


Under the MAP menu item, hit 'refresh maps' to restore the maps to the list.
If that fails, make sure you are signed onto your PC under the correct user name....


Hope it works


73, Bill W1WAB

On 4/21/2018 10:01 PM, Keith VE7GDH ve7gdh@... [ui-view] wrote:

You should be able to copy uiview32.ini and UIREG.BIN
over to the new installation folder to speed things up.
Look and see if any paths in the INI file need to be
edited. You could also copy your maps (& extra maps)
over there too.

Can't do that with UIview32.ini听 .听 There are absolute path references in 听 听
UIview32.ini 听 听 that will be wrong if it is moved.听 You need to do a
re-install to ensure all paths are correct.

Chris G4KVI wrote..

My extra maps have stopped working. I have
posted some photos.

The pics are there. It only took a moment to spot
the problem. You installed UI-View below Program Files (X86).
Don't do that! Uninstall UI-View and install it somewhere
else not below Program Files or Program files (X86) or
any other protected folder.

You should be able to copy uiview32.ini and UIREG.BIN
over to the new installation folder to speed things up.
Look and see if any paths in the INI file need to be
edited. You could also copy your maps (& extra maps)
over there too.

--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"

Chris G4KCI wrote...

My extra maps have stopped working. I have
posted some photos.

There seems to be a problem with the uploaded pics.

I presume you can't load the "extra" maps. What is
the path to your extra maps. Do you actually see
them there, along with the INI files?

--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"

My extra maps have stopped working. I have posted some photos. Please have a look and tell me what has happened. I can see nothing obvious.