开云体育

Hi Group

It's eating humble Pie time. I solved the registration problem. The e-mail clearly said, "Copy the registration details EXACTLY as printed". I used by name, Bob, instead of my full name AND surname. Now I can start setting it up. 73s Bob

Hi GroupI'm Bob vk2byfYears ago I used to monitor the 145.175 frequency using an IC-02A and a Kantronics KPC-3 TNC. I'm pretty sure I was using UI-View.Lately I have bee renewing my interest in Amateur Radio by chasing after the satellites and learning packet again.some QuestionsI tried an old PC with legacy RS232 ports but can't even get to the setup screen. It runs Windows XPCan I use UI-view32 with Windows 7?I registered and got a number years ago but it won't accept the number now.I re registered and got the same number again but it still wont accept it.I even downloaded UI-View32 again and registered it but I just can't get past that first screen.Is there another packet program that will run on Windows 7 64bit?Ultimately I would like to digipeat through the ISS and some of the new Satellites.I have tried AGW and UISS but had trouble transmitting. (prolific/windows driver) RX was ok.I have tried for a long time to work it out by myself but the old brain is worn out.Thanks's in advance if someone could point me in the right direction.73 Bob

Erv K0OT wrote…

That would normally be true but all ports are closed in my configuration unless they are explictly opened.

Can you connect to server? What is not working? Are you sure you don't have a firewall issue?

--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"

From: ui-view@... [mailto:ui-view@...]
Sent: Friday, June 26, 2015 15:08
To: ui-view@...
Subject: Re: [UI-View] required port mapping in router

__That would normally be true but all ports are closed in my

configuration unless they are explictly opened.

Erv,

In this case you have to allow the outgoing connection to port 14580 of the
server and forward the incoming port 14580 to the correct PC on your LAN.

This may require that you use static LAN IPs or at least use IP
reservations in your DHCP server settings.

73 de Gerhard, F5VAG
callsgn at name dot paris

Thank you was to be my next try just wasn't sure if there were any others
needed



Er v K0OTZ

__That would normally be true but all ports are closed in my

configuration unless they are explictly opened.

Erv,

In this case you have to allow the outgoing connection to port 14580 of the
server and forward the incoming port 14580 to the correct PC on your LAN.

This may require that you use static LAN IPs or at least use IP
reservations in your DHCP server settings.

73 de Gerhard, F5VAG
callsgn at name dot paris

Erv K0OTZ wrote…

I need to know the internap (?) and external ports that need to be mapped in my router to allow the traffic in and out of the UI-View software…

You shouldn't have to open any ports for UI-View to work properly, except for accessing the UI-WebServer from the outside world.

--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"

__That would normally be true but all ports are closed in my configuration unless they are explictly opened.

Erv K0OTZ._,_.___

_____

Posted by: Keith VE7GDH <ve7gdh@...>

_____


<;_ylc=X3oDMTJwcTk5Zm9xBF9TAzk3MzU5NzE0BGdycElkAzEyMjk2MARncnBzcElkAzE3MDUwNjMxMDgEbXNnSWQDNjg0MzkEc2VjA2Z0cgRzbGsDcnBseQRzdGltZQMxNDM1MzUyMzM4?act=reply&messageNum=68439> Reply via web post

?

<mailto:ve7gdh@...?subject=Re%3A%20%5BUI-View%5D%20required%20port%20mapping%20in%20router> Reply to sender

?

<mailto:ui-view@...?subject=Re%3A%20%5BUI-View%5D%20required%20port%20mapping%20in%20router> Reply to group

?

<;_ylc=X3oDMTJkOHJpdTNrBF9TAzk3MzU5NzE0BGdycElkAzEyMjk2MARncnBzcElkAzE3MDUwNjMxMDgEc2VjA2Z0cgRzbGsDbnRwYwRzdGltZQMxNDM1MzUyMzM4> Start a New Topic

?

<;_ylc=X3oDMTM1NTdtc2dsBF9TAzk3MzU5NzE0BGdycElkAzEyMjk2MARncnBzcElkAzE3MDUwNjMxMDgEbXNnSWQDNjg0MzkEc2VjA2Z0cgRzbGsDdnRwYwRzdGltZQMxNDM1MzUyMzM4BHRwY0lkAzY4NDM0> Messages in this topic (6)

Please do not top post, and trim quoted text as much as possible.

UI-View website:

UI-View Registration:
Select language & fill in your name and callsign. Return later
to collect your registration.

APRS Server List: To update the APRS Server List, change the
download URL to... aprs2.net/APRServe2.txt

For North American users, PMap 9 (Precision Mapping 9.0) along
with PMapServer 9 can provide street level mapping for all of North
America. They can be installed without hassle on Windows 7 & 8.
PMapServer is available for download on the UI-View website.
However, Undertow Software is no longer selling new copies of
PMap 9, but existing owners can continue to use it as long as they
can get it registered.

Users of Windows Vista, 7 or 8 should not install UI-View below
Program Files. Instead, create a folder elsewhere. To view UI-View's
built-in context sensitive help file, download and install WinHlp32.exe.


Useful hints and tips about setting up and using UI-View are
available on Stephen WA8LMF's website.


<;_ylc=X3oDMTJkbmoyc2twBF9TAzk3MzU5NzE0BGdycElkAzEyMjk2MARncnBzcElkAzE3MDUwNjMxMDgEc2VjA3Z0bARzbGsDdmdocARzdGltZQMxNDM1MzUyMzM4> Visit Your Group

· <;_ylc=X3oDMTJlMnJkazdxBF9TAzk3MzU5NzE0BGdycElkAzEyMjk2MARncnBzcElkAzE3MDUwNjMxMDgEc2VjA3Z0bARzbGsDdm1icnMEc3RpbWUDMTQzNTM1MjMzOA--> New Members 7

<;_ylc=X3oDMTJjaHEwYWY3BF9TAzk3MzU5NzE0BGdycElkAzEyMjk2MARncnBzcElkAzE3MDUwNjMxMDgEc2VjA2Z0cgRzbGsDZ2ZwBHN0aW1lAzE0MzUzNTIzMzg-> Yahoo! Groups

? <> Privacy ? <mailto:ui-view-unsubscribe@...?subject=Unsubscribe> Unsubscribe ? <> Terms of Use





.

<>
<>

Erv K0OTZ wrote…

I need to know the internap (?) and external ports that need to be mapped in my router to allow the traffic in and out of the UI-View software…

You shouldn't have to open any ports for UI-View to work properly, except for accessing the UI-WebServer from the outside world.

--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"

I have just installed a new router and have it a bit tighter than
previously. I need to know the internap and external ports that need to be
mapped in my router to allow the traffic in and out of the uiview software.
I know it uses 14580 internally but does in translate and what does it need
coming back? Should be simple but I am missing a piece somewhere



Than ks



Erv Heimbuck K0OTZ

I think I may have found it. It's a separate help file in the UI-View32 folder.


Max KG4PID

Well I got as far as


"Multiple Configurations
It is possible to create multiple configurations for UI-View32 - perhaps one for home use and one for mobile use - using VBscripts. for more information, see the Multiple Configurations help file"


but when I click on the link nothing happens. Is this a local file or a website? I must be missing something.


Max KG4PID

On 6/18/2015 11:49 PM, kg4pid@... [ui-view] wrote:

Does Ui-View32 have the capability to be started with a different
configuration file? Is this possible with Ui-View? If not, is there another
aprs client that will? I could make it work by creating some batch files to
copy the correct configuration files before starting, but I rather not if I
don't have to.


Max KG4PID

Yes! UIview can do this! Search in the UIview help system for "Multiple
Configurations" . In turn this topic links to a separate help system just for
this issue.


-------------------------------------------------------------------------------

--

Stephen H. Smith wa8lmf (at) aol.com
Skype: WA8LMF
EchoLink: Node # 14400 [Think bottom of the 2-meter band]
Home Page:

Live Off-The-Air APRS Activity Maps
<>

Long-Range APRS on 30 Meters HF
<>

Does Ui-View32 have the capability to be started with a different configuration file? I use a laptop and when I'm at home I make an AGWPE type connection to LDSPED running on my Raspberry Pi which lets me see everything my igate hears. But when I'm away I like to be able to connect directly to the APRS-IS. And I'm in the process of setting up an igate on 145.825 for the ISS and anything else on that frequency. So I need the ability to start Ui-View32 with a different configuration depending on what I want to look at. Is this possible with Ui-View? If not, is there another aprs client that will? I could make it work by creating some batch files to copy the correct configuration files before starting, but I rather not if I don't have to.


Max KG4PID

Try this. It works for me.



73 de Gerhard, F5VAG
callsgn at name dot paris

How do you change the settings to one daily email instead of email per response? I cant find the settings in this new yahoo lay out!!


=]




WW5RM

On 6/18/2015 12:02 AM, 'Stephen H. Smith' wa8lmf@... [ui-view] wrote:

On 6/17/2015 11:59 PM, 'Stephen H. Smith' wa8lmf@... [ui-view] wrote:

On 6/17/2015 3:48 PM, W8NJR@... [ui-view] wrote:

Steve: Thanks for the quick response. I downloaded your file and unzipped
it. There was two files in it. A file called D-700-Alt and another named
ts2000. I didn't see anything for the TM-D710G. Is one of these files the one
I need?

Thanks,
Terry W8NJR

Aha! I had an updated version of this file that includes the D710 .CMD files
in my local archives, but overlooked uploading it to my webserver after the
updates!

I have now uploaded the correct current version of "UIview_TNC_CMD_Files.zip"
to my webserver at:

<>

-------------------------------------------------------------------------------

--

Stephen H. Smith wa8lmf (at) aol.com
Skype: WA8LMF
EchoLink: Node # 14400 [Think bottom of the 2-meter band]
Home Page:

Live Off-The-Air APRS Activity Maps
<>

Long-Range APRS on 30 Meters HF
<>

On 6/17/2015 11:59 PM, 'Stephen H. Smith' wa8lmf@... [ui-view] wrote:

On 6/17/2015 3:48 PM, W8NJR@... [ui-view] wrote:

Steve: Thanks for the quick response. I downloaded your file and unzipped
it. There was two files in it. A file called D-700-Alt and another named
ts2000. I didn't see anything for the TM-D710G. Is one of these files the one
I need?

Thanks,
Terry W8NJR

Aha! I had an updated version of this file that includes the D710 .CMD files
in my local archives, but overlooked uploading it to my webserver after the
updates!

The updated file is attached. Note that there are two versions of the D710
init: One for fixed station use /without/ a GPS attached, and a second one for
mobile use WITH a GPS attached.

OOPS! I through I was responding directly to the sender off-list... Of
course the attachment didn't make through the Yahoo! remailer. Resent direct
to W8NJR.

On 6/17/2015 3:48 PM, W8NJR@... [ui-view] wrote:

Steve: Thanks for the quick response. I downloaded your file and unzipped
it. There was two files in it. A file called D-700-Alt and another named
ts2000. I didn't see anything for the TM-D710G. Is one of these files the one
I need?

Thanks,
Terry W8NJR

Aha! I had an updated version of this file that includes the D710 .CMD files
in my local archives, but overlooked uploading it to my webserver after the
updates!

The updated file is attached. Note that there are two versions of the D710
init: One for fixed station use /without/ a GPS attached, and a second one for
mobile use WITH a GPS attached.

Further, be aware that if you are using the new second-generation D710G with
the built-in GPS, that the GPS pass-through feature (that combines TNC RX data
and local GPS data on the same connection to the PC the way the older D700 and
D7 did ) only works when using an _EXTERNAL_ GPS connected to the serial port
on the radio control head. The internal GPS only works in the stand-alone
"APRS" mode; not with an external computer involved.

-------------------------------------------------------------------------------

--

Stephen H. Smith wa8lmf (at) aol.com
Skype: WA8LMF
EchoLink: Node # 14400 [Think bottom of the 2-meter band]
Home Page:

Live Off-The-Air APRS Activity Maps
<>

Long-Range APRS on 30 Meters HF
<>

Are u trying to track a single station when it moves or just a general announcement when all stations appear.

Terry K1LCH

Hi Terry,

Thanks for responding so fast.

I wanted to have the sound made whenever the station
was found after the first time.
My program use to do it and for some reason has stopped.

I did try your suggestion and there was no sound.
It done sound the call letters the first time.
I don't see any difference between announced stations
first time and announces every time.

What do you think????

Thanks,
Robert

Hi Terry,

Thanks for responding so fast.

I wanted to have the sound made whenever the station
was found after the first time.
My program use to do it and for some reason has stopped.

I did try your suggestion and there was no sound.
It done sound the call letters the first time.
I don't see any difference between announced stations
first time and announces every time.

What do you think????

Thanks,
Robert