¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. UI-View
  2. Messages
Expanded Topics Messages Polls
Date
3 OMs with same QTH locator

"Adriano Migliari" <[email protected]
 

Roger

from today, we are 3 OMs using UI-VIEW under the same
QTH jn45rq (45.41.40N 9.25.33E) more or less 300 meters far from
each other....


If All are on the air.... how can we distinguish on the MAP... same
simbol!!!!

Any suggestion???

Cordiali saluti / Best regards

Adriano Migliari

EMAIL: madriano@...
AX25: IK2CBD@... JN45RQ
Merate (LC) Italy
Re: KPC3+ and KISS problem

Roger Barker <[email protected]
 

In article <3872EAA2.6C0E71BF@...>, Ev Tupis (W2EV)
<propnet@...> writes
From: "Ev Tupis (W2EV)" <propnet@...>


Dave Ackrill wrote:
Then, I noticed that UI-View's
screen cleared and all the icons redrew themselves each time a new icon
appeared on the screen.
That's actually normal!
That is interesting information to have. I guess I didn't realize it
until I had a lot of icons to redraw. I suppose this infers that
processor and video card speed has a direct relationship with UI-View's
display performance (more so than a package that doesn't redraw
everything each time a new icon appears).
It doesn't redraw everything each time a new icon appears, it only
redraws when an existing icon changes. You can control the redraw
behaviour from "Auto Refresh" in "Miscellaneous Setup", or you can
disable Auto Refresh on the Options menu. Whether the default refresh
mode of immediate is suitable depends on the speed of your PC and the
level of activity you are seeing.

Note that WinAPRS does not do an immediate redraw.

Similar comments apply to the setting of "Automatically sort station
list."

--
Roger Barker, G4IDE roger@...
Boston, UK

$20 GPS PIC (off topic)

"Pauline Moldon" <[email protected]
 

Hi all,

Slightly off topic.
Help please.


I wonder if anyone has a spare/unwanted PIC programmed/unprogrammed for use
with the $20 GPS Receiver.



Happy 2000,


Pauline

G7SPT@GB7ZZZ
Re: I-Gate

Roger Barker <[email protected]
 

In article <947055195.15898@...>, surf@... writes
From: surf@...

Hello all I have trouble here with the UI-View using
version 2.16 , It is not transmitting to the internet.
I getting total no responce (ack) from stations at all.
1. In "Station Setup", set an interval for your internet beacon.

2. Read the "APRS Serve" section of the help, there's some good stuff in
there!

3. Open the Message window.

4. Connect to APRServe, saying "yes" to the "Log on when connected?"
question.

5. You can see when you are connected, because all the incoming data
will start appearing, and you will see a message from the server saying
that you have connected.

6. Your first posit beacon will go out about 15 seconds after you
connect.

7. When sending messages, you must use port 'I' (for Internet). If you
use the default port '1' (one) they go out on the radio.

--
Roger Barker, G4IDE roger@...
Boston, UK

Re: KPC3+ and KISS problem

ken collins <[email protected]
 

In message <3872EAA2.6C0E71BF@...>, Ev Tupis (W2EV)
<propnet@...> writes

TimeOut, meaning that after n-minutes of not being received, the Icon
goes away. F-a-n-t-a-s-t-i-c! I've been waiting for APRS to do that
for a long time now. So far, I'm quite impressed with UI-View!
Hi Ed,

The expire time can be set by the user from Setup - Miscellaneous.
Pressing the F1 key whilst you are in there will bring up the context
sensitive help.

An expire time of 0 will leave the icons on permanently.


--
Ken
figured it out

Norm Johnson
 

i have UI-VIEW v2.16b now xmitting on the inet. if i am right the problem
was i was not changing the port to I instead of port 1. had several chats
last night and all seemed to be working fine and even sent some e-mail .
73 and Thanks.
Norm n0els
Re: WXData Uploaded

"Alan Wallace" <[email protected]
 

Thanks Karl,

Had a bit of a battle downloading the new file myself - was being cached by
my Wingate Proxy agent.

Looks good now.

73,

Alan Wallace ZL1AMW Email: alan.wallace@...

-----Original Message-----
From: Karl G6ODT [mailto:g6odt@...]
Sent: Wednesday, 5 January 2000 09:06
To: ui-view@...
Subject: Re: [ui-view] WXData Uploaded

From: "Karl G6ODT" <g6odt@...>

Hi ,

Many tnx for the very prompt reply, sounds good.

Where can I get the new version? I note the copy in the "extras" folder
is
still MPH only.
I've uploaded it again. For some reason it didn't get updated.
You'll now see both MPH and KmPH.
73 Karl G6ODT
g6odt@...



24hr Digi 144.800 Relay,Wide,Irth,G6ODT

--------------------------- ONElist Sponsor ----------------------------

GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
<a href=" ">Click Here</a>

------------------------------------------------------------------------
$20 GPS PIC (off topic)

"Pauline Moldon" <[email protected]
 

Hi all,

Slightly off topic.
Help please.


I wonder if anyone has a spare/unwanted PIC programmed/unprogrammed for use
with the $20 GPS Receiver.



Happy 2000,


Pauline

G7SPT@GB7ZZZ
Re: v2.16B

Carl
 

No, because "Ok" accepts all the changes you have made while the
dialogue is open. For example, you might add stations to the list or
Hmm.

Also, the blue text in the dialogue says "Add stations to the excluded
list by entering them into the text box and pressing <return>."
:-)
rats. I did it again... :)

Carl gw0tqm
carl_mail@...
gw0tqm@...
Re: KPC3+ and KISS problem

Ev Tupis (W2EV)
 

Dave Ackrill wrote:
Then, I noticed that UI-View's
screen cleared and all the icons redrew themselves each time a new icon
appeared on the screen.
That's actually normal!
That is interesting information to have. I guess I didn't realize it
until I had a lot of icons to redraw. I suppose this infers that
processor and video card speed has a direct relationship with UI-View's
display performance (more so than a package that doesn't redraw
everything each time a new icon appears).

On a related note, I've just experienced what I believe is an Icon
TimeOut, meaning that after n-minutes of not being received, the Icon
goes away. F-a-n-t-a-s-t-i-c! I've been waiting for APRS to do that
for a long time now. So far, I'm quite impressed with UI-View!

Ev, W2EV
--
PropNET: A digital wireless
data network designed to
plot band openings in near
real-time. Intreagued?
I-Gate

[email protected]
 

Hello all I have trouble here with the UI-View using
version 2.16 , It is not transmitting to the internet.
I getting total no responce (ack) from stations at all.
It works fine out to the VHF port but not to internet.
Using the rego version and with a validation number. The
number is correct I ask agin this to k4hg. Anyone have a
clue please .. send me email ASAP to:
surf@... .. cheers de Art Australia
Re: UI-Path New Feature and Screenshot

[email protected])
 


It can be found from the ACCESS bit of UI-PATH and clicking on a station.

73 - Andy, G7OCW



[Attachments have been removed from this message]
I think the last bit in square brackets says it all really :-) or :-(
depending upon your point of view <Grin>

May I suggest adding it to the 'Extras' file in the File area of Onelist please?

(For those unsure of how to get to the Files area, go to the onelist UI-View
area and click on 'Files' on the left hand side of the screen. HTH)

Cheers de Dave (G0DJA)
Re: v2.16B

[email protected])
 


I wasnt pressing return. Call me mister weirdo, but I was
pressing OK. Pressing OK should work shouldn't it??
Excuse the smile here :-)

That instruction (hitting 'Enter') isn't only in the help file, it's on the
screen, printed on the dialogue box.

I'm trying not to sound sarcastic, honest, but it certainly gave me a giggle
after my 1st day back at work after the hols.

:-)

De Dave (G0DJA)
Re: v2.16B

[email protected])
 

From: Roger Barker <roger@...>

In article <VA.000001a8.0120caba@study>, Carl <carl_mail@...> writes
From: Carl <carl_mail@...>

Either I have found a bug or a feature.

The excluded list clears itself everytime you
call it up. Is that deliberate?
Do you mean "Setup", "Excluded List"? Mine doesn't. What are you putting
in it?
I can confirm that all the stations which I, temporarily, put in the
excluded list stayed there even if I put another station in later.

I wonder if it's as simple as forgetting to hit 'enter' after typing the
callsign in the box at the bottom. If not, then I'm out of ideas......

Cheers - Dave (G0DJA)
Re: Did anyone see me?

[email protected])
 

From: Ian Wade <ian@...>

Did anyone see me /M in the Midlands on 144.800 yesterday afternoon? I'm
interested to know what digis are operational in that part of the world.
I didn't see Ian, but here's a few West Midlands stations that are often
plotted from up here:-

G1ZRN - Kidderminster
G8VPR - Cannock
2E1EQJ - Telford
G7OCW - Telford
G0CER - Telford

If I get chance, I'll take the TNC with me to the office in Coventry and see
who else is about.

Cheers - Dave (G0DJA)
Re: KPC3+ and KISS problem

[email protected])
 

From: "Ev Tupis (W2EV)" <propnet@...>

Then, I noticed that UI-View's
screen cleared and all the icons redrew themselves each time a new icon
appeared on the screen.
That's actually normal!

When you get a few hundred, or even a thousand, plots as you will from the
Internet APRServer, then it can get to be very noticable.

I use my KAM+ in KISS mode, and it works well. The only thing that I would
change, if I could afford it, would be to upgrade to a version of the
firmware that would support GPS input.

Cheers de Dave (G0DJA)
forgot to mention

Norm Johnson
 

i forgot to mention in the previous note that i am running the latest Beta
version.
Norm
UI-VIEW on internet

Norm Johnson
 

can someone help this old dummy, i have went over and over on the setup and
thru the help files but cant get ui-view to transmitt on the internet. it
does just fine on the vhf radio side. can someone give me a blow by blow
detail on how i shud have it set up ? all help appreciated.
Thank You
Norm Johnson n0els
n0els@...
Re: lan feature

Bob
 

Thanks for the tips Roger
I was working from memory with most of it and do have the 1448 as the port i
just added a few more digits than needed in the write up.

anyone else tried it yet ?????
Regards
Bob Scaife
g7paf@...
ax25 g7paf@gb7jem.#19.gbr.eu
icq 17945619

-----Original Message-----
From: Roger Barker <roger@...>
To: ui-view@... <ui-view@...>
Date: 04 January 2000 15:41
Subject: Re: [ui-view] lan feature


From: Roger Barker <roger@...>

In article <001f01bf569e$fee36480$0200a8c0@pent133>, Bob
<g7paf@...> writes
[snip]

Pleased to see that Bob has got it working. Just a few comments:-

Go to the tab IP Address and click on Specify an IP address
in the section IP Address type 192 168 0 1
You should also add a subnet mask of 255.255.255.0. (Or does Windows put
it in for you?)

now go to the windows directory and look for a file called HOSTS.SAM (if
you
have amipro on your machine it will have the amipro icon) control and
right
click and select OPEN WITH if that happens and use the NOTEPAD icon
ok now you need to add in the address's of all the machines you want
uiview to
access mine looks like this

192.168.0.1 pent133
192.168.0.2 dawns
192.168.0.3 laptop
save the file once compleated
HOSTS.SAM is a SAMple HOSTS file and is ignored by Windows, the file
should be saved as HOSTS - no extension.

Also, an additional entry of -
127.0.0.1 localhost

is always a good idea - it allows you to connect to servers on your own
PC.

click on the uiview-ini file (not the one with the globe icon)
come down to the section [APRSERVE]
type in the name of your machine ie PENT133 and the ip address like this
PENT133=192.168.0.1
That isn't needed. Try taking it out, it shouldn't make any difference.

come down a few lines to HOST and change to
HOST=PENT133 (OR WHAT EVER YOUR MACHINE NAME IS)
and PORT to PORT=14480
That can de done from the "APRS Server Setup" dialogue. Those are the
two INI file entries that are updated when you select the server in the
dialogue.

next come down to [APRS_Servers]
and add the line PENT133=14480
That is the only editing of UIVIEW.INI needed.

I would recommend leaving the port at 1448, rather than changing it to
14480. The idea is that all UI-View servers should use 1448 unless there
is a good reason not to do so - no reason other than to make it easier
to connect to someone else's server.

One other point - In the "APRS Server Setup" dialogue, if you're
connecting to a UI-View server, you don't need to check "APRServe log on
required."

--
Roger Barker, G4IDE roger@...
Boston, UK

Re: UI-Path New Feature and Screenshot

Roger Barker <[email protected]
 

In article <000901bf56e9$7d511de0$23212121@down>, Andy Pritchard
<apritch@...> writes
From: "Andy Pritchard" <apritch@...>

Used to be able to send attachment???
I disabled it a long time ago. It was causing too much aggro. The
problem was that someone would intend to send an attachment to someone
else, but accidentally send it to the list.

--
Roger Barker, G4IDE roger@...
Boston, UK

67721 - 67740 of 69610