Tom WA9AFM wrote…
UIView32 is now in 'receive only' mode. What needs to be done to get it back in 'normal' mode?
What does “receive only” mean? Does it no longer command the TNC to transmit?
WA9AFM-10 is “beaconing” over TCPIP. I can’t tell from here if it is transmitting with no path on RF as well or not.
WA9AFM appears to be a WX station also “beaconing” over TCPIP. Same comment… I can’t tell if it is on RF as well.
However, there is another WA9AFM with a non-validated connection to various CWOP servers. It is at a slightly different location.
Which one are you concerned about?
What do you have in your station setup for the unproto port & address and the beacon interval?
What do you have in the comms setup, and what do you see in the terminal screen when you “OK” your way out from it?
--
73 Keith VE7GDH
“ I may be lost, but I know exactly where I am!”
--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"
