Steve: Thanks for the quick response. I downloaded your file and unzipped
it. There was two files in it. A file called D-700-Alt and another named
ts2000. I didn't see anything for the TM-D710G. Is one of these files the one
I need?
Thanks,
Terry W8NJR
toggle quoted message
Show quoted text
In a message dated 6/17/2015 2:53:58 P.M. Eastern Daylight Time,
ui-view@... writes:
On 6/17/2015 10:25 AM, W8NJR@... [ui-view] wrote:
I am running UI-View32 and cannot get it to work with my new Kenwood
TM-D710G radio. Does anyone have any suggestions or a good
initialization file
they could send me? I would appreciate any help.
73, Terry Netzley
W8NJR
UIview became "frozen in time" and unchangeable or updatable over a decade
ago,
following the death of it's author in late 2004. This was long before
Windows
7, the TH-D710 and the TH-D72 appeared. A zip file of TNC init files for
these newer radios and the TS-2000 are located on my website. Go to:
<>
Scroll about 2/3rds of the way down the list of downloadable stuff and
look for
the link to "*UIview_CMD_Files.zip*".
You may also want to review the numerous issues relating to the aging of
UIview
(Especially running it with Windows 7 or 8.x) here:
<>
________________________________________________
--
Stephen H. Smith wa8lmf (at) aol.com
Skype: WA8LMF
EchoLink: Node # 14400 [Think bottom of the 2-meter band]
Home Page:
Live Off-The-Air APRS Activity Maps
<>
Long-Range APRS on 30 Meters HF
<>
[Non-text portions of this message have been removed]
