Yesterday I installed the software, and at first tried using the WINPDDE option in the "host mode" settings. Unfortunatly there seemed to be no response via WINPACK 6.4 (Winpack was running, but not connected)T
I then tried setting "None", closed Winpack and all started to work OK ? Is there something I have not done ?
I also have a problem setting UNPROTO in my TNC to CQ,Relay,Wide (Wrong syntax,does not like the comma)
The only way to enter this is:-
UNPROTO CQ Via Relay,Wide
Will this work ?
At present I can only see three local stations, which are in direct range of my station.
The TNC is a Kantronics KPC2, with direct connect to PC running Winpack.Operating system Win98.
Regards
G8XLH
General Comment for Roger"It looks a fine program, I hope it continues,and may restore some real-time QSO's to packet users.It would be usefull if the stations running UIVIEW also included some real-time information in the Station Info screen like....Monitoring 70.200,144.300 beaming north etc.......Then it could be used as an indication of where real-time voice traffic can be exchanged, or help with DXing, but for distances not worthy of posting on the DX Cluster. I guess some form of Input form would help eg Whats your BBS,E-Mail,Where do you listen...What do you think ?"
