开云体育

We were using it on a computer that was still running Windows 7. It loaded up ok and in the device manager was indicating that there was not a problem. Unlike Win 10 which now has started saying they

Try rolling back to cable driver to 3.2.0.0. A lot of ‘Prolific’ cables have fake chips in them. Prolific has arranged for years that the latest and greatest Prolific drivers make is so the cable

Thanks for the input. The programming software we are using is 1.4 from Byonics. We cannot get the computer to talk to the unit. We are using a usb to serial cable ( Prolific PL2032HSX) and a jury

NOOOOH!? V1.7 is the transmitter-only firmware for the MF-15. It will corrupt the unit and probably make it necessary for me to have to reflash firmware to the PIC. ( Okay, its not the end of the

Lance, Do you have an MT-1000 HA or an MF-PC? One is an APRS tracker, and the other one is a radio-controlled/programmed Fox hunt transceiver. Do you have a Byonics programming cable? If so, you will

Have you looked at this site: https://www.byonics.com/mf?It shows the manual for firmware V1.7.? It says it is for the MT15 (15mW version), so the difference is probably output power. There is

We have a Byonics MF-PicCon MT-1000 V1.7 that was delivered with out paperwork. We are trying to program and hook up but are unable to descern what is what as there is only older manuals, not the

Each setting is independent.? So SBEN, PPERIOD, BPERIOD, etc. will still function normally.? If MPPERIOD is set to Zero, there will be no MANUAL position reports.? MANUAL (oddly enough) means (an

understood and agree on the mpperiod. i have a kenwood v71 in the truck :)? the gobox computer/radio will strictly be digi/winlink.?? BTW, if set for 0? does that mean no report?? that would be

Okay. looks like your radio has the ability to specify the 'packet channel' on one band while using voice on the other.? Nice feature! I still don't see why you need MPPERIOD at 60?Example of

Testing, as in on chan A/voice with APRS on chan B, if i key up on A, it will tx on B with a position report. If that's correct, yeah i'll need to adjust MPPERIOD for normal? operations of about

You don't really explain the "test results". My understanding is YES!? When the TT4 is connected with MPPERIOD > 0 and using voice (on any frequency), the MPPERIOD is the minimum time between

test run, regular (without the bt) KM4KQQ-1, 9/13/22-0321-0451.? looks like i need to adjust sben stuff, but seems to be behaving itself :) THANKS to Robert and Lynn. See ya Lynn at the Tour De Cure.

Changed to: CDMODE *TONE * Digimy *T* PPeriod *360* Question about MPPeriod, will it TX position even if not on the APRS freq when i key up?? I used it for if Net Control needed a position check or

That should work fine, but I can make some recommendations:????cdlevel 20 ????cdmode LEVEL The TT4 will work much better with CDMODE TONES and the radio squelch OPEN (constant noise).? This

OK, i think i have it all!?? THANKS? If i just keep the BT connected all the time (and only put the computer online as needed) this is what i? think i should set it up as (no BTEXT since it's

Although many users may set them tot he same value, they are different: ????BTEXT is the "Beacon TEXT " that is sent every BPERIOD as a separate packet.????TSTAT is the "Text STATus" appended

You can set it to anything you want, other than zero.? Specific values might be required by whatever is going to consume the KISS-wrapped NMEA strings.? I can only speak for APRSIS32 which doesn't

oops hit send to fast.......BTEXT vs.TSTAT.....different uses? equal?

Sets all incoming GPS data to be sent out the KISS port with the given KISS id. Set to 0 to disable. Anyone have an idea/clue as the what the [ID] should be set to?? (above is direct quote from the