开云体育

Sorry about not explicitly stating how the TT4 was being used. I have been using it as a mobile TX/RX iGate and fill-in Digi when combined with APRX on a Pi W Zero.? Worked well. For the current

Peter, Could you amplify a bit on your application? For instance, if you are using the TT4 as a tracker, you must set PPeriod ( The rate at which it sends transmissions, default is zero) Generally,

Anybody have a working set of configs for using a TT4 with Debian linux SBC? Been working on this too long, when "everyone" says its plug and play. Reflashed V0.72 software, been through all the

Tried both sending file with minicom and using cat xxxx644.TT4 > /dev/ttyUSB0 as ??? poured out.? Using cat, the file seemed to upload, but TT4 remained borked. Only thing that worked was Wine & the

Got my TT4 back via Wine & config software.? Only tricky part was finding the correct comm port.? It is located under ~/.wine/dosdevices.? Look for the ln to appropriate /dev/ttyUSBxx port Now to

HI, I have a display but it shows only " TT4 Alpha v0.68 1284" How can I see my GPS position? Is there any manual for using this display? 73, Corneliu YO4AUL

The Config tool is a good bet.? I think it just looks for the ? and does the rest. If that doesn't work, it looks like it the TT4 is looking for input. Try just sending the file in minicom while the

Thanks for the tips. Issue right now is that I can't even get into the bootloader via minicom.? Just keeps pouring out ??? with leds lit like a Christmas tree Will try the "official" configuration

I've used minicom in LInux and noticed that the data appears to be sent too fast. I had similar issues with TeraTerm until I found that you can put in a "NewLine Delay". I just checked and you can try

My TT4 (V1.2b with 644 chip) has been behaving really weird lately.? Using Minicom in linux to reconfigure with 19200 8N1 no flow. Once in config, it coughs up partial/truncated responses, locks up

I am moving this to the regular Groups.IO discussion because it is getting into questions that others may have as well.Everyone benefits! First I'll answer you question:The? ALIAS# does not contain

Thanks for all the great information everyone. I'm going to absorb it then have a tinker. Regards Andrew, N1ACW -- [email protected]> wrote:

I like the AGW products as well.? I find the most helpful product is the AGWmonitor.? Being able to monitor the packets with AGWmonitor anywhere on the network and getting a simple mheard list can

When I want to monitor the output of a TT4/MTT4BT device, I am not just interested in how the TT4 is handling things, but rather, how the local infrastructure is dealing with the packets I generate.

First, aprs.fi uses its own password, not the APRS-IS passcode used for APRS clients. Second, you should not recommend online passcode generators.? The APRS-IS system? is very specific on the

Andrew, Not a dumb question at all! In fact, I had to pour through the manuals to find what I believe to be the answer. Setting PKTOCOM to True should cause anything that the TT4 originates to be

Look up your callsign in aprs.fi, and look at raw packets? Helped me fix some issues with my wx install as I fine-tuned some format errors. You need to log in to see the raw, I believe. Should get

Hello all, Sorry for this dumb newbie question. I have set up my TT4 as a local WIDE1 fill-in digipeater. I'm curious what's being translated and digipeated, so I have the TT4 connected to a serial

I have only successfully used the TinyTrak4 for digipeater purposes. The very informed and knowledgeable folks in this group told me how to do it. I'd have to go back and look at my settings, but I

The TT3 has no receive capability so cznnot be used as a DIGI.A DIGI will receive a packet, determine if there are path elements unused, then repeat tgat packet.Key element us receiving. On Sun, Mar