开云体育

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Robert, Thanks for the help, and the clear explanation. I am embarrassed I missed that. ;) TNK es 73s, Alan WA4SCA

So the TSAT ( *TSTAT is MTT4B -=Last Chance Digi=-* ) is the message that is in Mic-E format.? Must be due to *MICETMV is TRUE*. It always send the telemetry data right after the Mic-E packet. But

One device, one bank. BANK is 0 P300 is FALSE TXTDISP is FALSE NODISP is FALSE PPATHING is FALSE DMSDISP is FALSE MICETMV is TRUE ENTS is FALSE TELHIRES is FALSE TELVOLT is FALSE TELTEMP is

If you post the MTT4 config, it would help.Why are some packets on aprs.fi showing:???? 2023-08-17 14:34:23 EDT: NOLEN>APTT4,WIDE2-2,qAR,W1ARN-1:!3556.54N108643.72W#PHG2547/EM65?de?WA4SCA ??

Thanks, but those are already turned off. This is the packet which is being sent: 2023-08-17 09:38:53 CDT:

I almost forgot, TSTAT is another way of appending telemetry to position reports, again with ^{input} (like ^T and ^V). You must remove the ^T and/or ^V portion of the TSTAT. ------- Robert

If you are referring to BText messages that include temperature and voltage, you must remove the ^T and/or ^V portion of the BTEXT. The NODISP comment in the manual has nothing to do with Telemetry,

I am using a MTT4B as a fill-in digi, NOLEN. It sends the telemetry channels, even though they are not in use, and I haven't found the appropriate setting to turn them off. A minor use of bandwidth,

There is another way to add BT to a TT4 with a socketed MAX232 chip (kit version for sure).The catch is that you must switch to TTL for both serial devices (GPS and computer interface). Buy a cheap

Greg, If you're interested in making your own TT4BT, I have a schematic for it, and the parts appear to be pretty easy to come by. I was a beta tester for the TT4 way back then (15 to 20 years ago,

ALLCON, We had a number of PCB production issues with the prototype MT-AIO V4.1 tracker.? This is improved version of our old MT-AIO tracker ( The one in the yellow Pelican case) A bunch of parts for

Greg, My bad, I should have taken more time to understand your question. I manufacture and provide tech-support for the Micro-Trak line of products carried by Byonics, so my mind was somewhere else.

Hi guys, I was actually looking at the TT4 products page and at the bottom is the TT4BT, the Bluetooth adapter. Looks like its out of stock. Allen are you referring to that product or the actual

To explain the splitter a different wat from Allen, it does not split a computer port because the computer only has one set of serial pins per connector. It does split the A/B port of the TT4 line,

Greg, The MTT4BT is permanently discontinued. Note that the splitter that Byonics carries is just for the TT4. The MTT4BT already had a connector for each port ( A DB-9 and a 2.5mm jack)? but the

Hi everyone, been to the website and it shows the TT4BT out of stock. Any idea when it may be back in? Also i thought I saw a splitter cable at one point that could let you shar the computer port with

You state? ?> ... I can see beacons on a handheld but it does not appear to be making it anywhere?? ?> else. Here is settings.Is your comment in reference to the DIGI attempts, or beacons or

I followed all the settings in both the "firmware" documentation and posts on here and yet to get my TT4 to digi. I can see beacons on a handheld but it does not appear to be making it anywhere else.

Is this the KC3SGV balloon that was launched today? It seem it was a pretty good day to launch! Hit lots of Igates from altitude!! KB3KBR Greg. Sent from my Samsung Galaxy smartphone.