开云体育

Sorry for the delay in response! This problem came up last minute and the launch was today. Even though we couldn't receive the packets in the field, we were still able to track it. It was in range of

Which bank did you make the change in and which bank is being used? -- Compton VK2HRX Sydney, Australia

I recently changed a setting in my TinyTrak4 and don't understand why I'm having a problem. Setting was: PATH1 W4XXX Setting now PATH1 WIDE1-1 I've changed the setting to WIDE1-1, reinstalled the

Just a quick thought brought on by your project director telling me that he had not received the transmissions from the MT-1000 at all, even with an open squelch: You are tuning your AnyTone to

You can try listening to the MT1k packets by ear and compare them to the other packets that are decoded by the Anytones and/or APRSdroid on the phone.?? It may be that the MT1k packets have a

Sorry for not giving my callsign... KC3SRK - Giles Veit

We also have a second form of mobile receiving using a program called APRSdroid. It uses a Baofeng to receive the signal, and then it passes it to an android phone to be decoded. Again, it will read

Sorry - out of ideas - short of "borrowing" other radios. ------- Robert Giuliano KB8RCO

Shoot! I remember Direwolf from back in the day along with APRSIS32.? Did APRSIS32 under emulation under Linux and it ran well.? I agree the Anytones aren't that great but if the digipeater is 1200

Thank you both for responding. We already have an i-gate with APRSIS32 and that receives the packets just fine, our problem is only with the Anytones. We messed around with the AutoTX duration and it

I absolutely agree with everything Lynn said.? Especially about using a different radio and software type TNC (like Direwolf). However, I know school projects can be limited on equipment and

The Anytone isn't the best APRS radio around.? It is very selective as to what packets it can decode and which packets are just ignored.?? Anytones are particularly good at copying packets from

Hello. I am part of a school amateur radio club that is launching a weather balloon soon, and we are using the MicroTrak 1000 to track it. We are able to receive the MicroTrak on our station's i-gate,

The topic message pretty much tells all:? Byonics now has the RTG-30? ( 30-40 Watt tracker) back in stock. 73, Allen AF6OF

Never mind, I found the info. SkyWarn has its own special tornado Icon and comment field. Just in case anyone wondered why a Tornado was suddenly showing up in Napa, California, no fear, both I and

I inadvertently over-wrote a customer's RTG-50 that had been set up as a tracker for SkyWarn. Does anyone have any idea what Symbol/Table or other special settings these guys use? 73, Allen AF6OF

I see this every few months with a set of 4 MT44B units I look after in Syndey. Power cycle is the fix. We have investigated it with Allen over several years but have never found the cause. We now use

Sorry you have not received any replies.I am not sure I followed this, so will ask some questions:1. Are you saying your TT3 is not?? ? a) transmitting at all?? ? b) transmitting, but not being

Yes, the yellow LED indicates the TT "thinks" there is a signal.What are you using for CDMODE?? ?CD?? ?CD_inverted?? Something else?I assume you are not using Tones, but maybe.? Tones is the

Hi I have a Tiny Trak That works correctly but every month or so it locks up. When it locks up the yellow led is on steady, which would indicate that the squelch was open. But it is not open, in