开云体育

Hi Rob, please, a question. A few years ago, looking on the Byon site, I also found a site that sold electrical equipment for 12v cc. I can't find it anymore. Do you have any information please?

Very true, but if you can find one, you may also want to use a patch cord with a transformer, to help match the Speaker level impedance to the Microphone level impedance, to break any possible ground

search terms "stereo attenuation cable" and "audio attenuator" (esp. at Amazon) will provide a number of products suitable for reducing the speaker level audio to microphone level (for example:

Since the TT4 RED LED is on for a very short time, it doesn't appear the TT4 is trying to TX.? It could be RF getting into the audio wiring.A couple of things to try: 1. Move the TT4 away from the HT

When the DG-F8HP send this tone, is the TT4 RED LED "ON"? Does it happen every time you TX, or only when the Computer Terminal application closes? You don't say what you are using for "Terminal

Yes, stripped because it is an executable.You will need 7zip (freeware) and the password is Byonics Robert Giuliano KB8RCO

I don't believe there is a .exe to configure firmware 0.72. - I configure mine from the command line. Don W. KD4APP ________________________________ Sent: Tuesday, June 9, 2020 2:06 AM To:

Robert, THANK YOU, for the clarifications!! THAT HELPS! I evidently DON'T have the latest version of TT4A Config.exe software, because MY screens/tabs don't even HAVE the DigiMY feature showing

Lots to cover, but I'll try to be brief:1. First, I recommend updating the TT4 to the latest Alpha v0.72 firmware.??? This can be done using the TinyTrak4AlphaConfigv0.68.exe tool??? First save

Robert: THANK YOU for being so helpful! And so QUICK, TOO! I will make the TT4 configuration parameter changes you suggest, on BOTH of the TT4 units, and see if that fixes the issue with my mobile

So, your home station is doin g exactly what is expected - digipeating the data ithreceives that matches its alias: You send with a path of WIDE1-1, WIDE2-1Your home station will DIGI any received

I have been told / have learned that it is best to consult with a LOCAL APRS authority when setting up your station ... For example - and NOT to be argumentative - but the suggested PATHS statements I

Robert: My TT4 data setting info is shown below, alongside your original info request entries. Thanks. Dave Luchak / KL7BX (pronounced : Lew'-check) Monday / 6-8-20 / 3 PM CDT *

I find it best to reply to the group.? For every issue that is resolved will help someone else in the future. Since the only thing you are concerned about is that your mobile is DIGI'ed by you home,

Hello all readers! I am in need of troubleshooting assistance with my Byonics TT4 APRS unit in my vehicle. I have a home station APRS Base Station set up to run as an I-Gate/Digipeater (SSID:

Michael, You may have expectations of your Baofeng that it will find hard to meet. The primary virtue of a Baofeng is that it is cheap, and receiver sensitivity and noise are one of the big trade-offs

I have also tried to get the UV5R working with the tinytrak. Transmit works pretty well, but I've gotten quite poor receive performance even with LOTS of experimentation of MONITOR and RXAMP. Maybe

I just noticed this was sent to the Yahoo group.? This group (as has most) has moved from Yahoo due to changtes in policy. Please join us at: /g/TinyTrak/topics Best reception is

I just noticed this was sent to the Yahoo group.? This group (as has most) has moved from Yahoo due to changtes in policy. Please join us at: /g/TinyTrak/topics Robert Giuliano

Groups.io includes a WIKI section.? I wonder if tidbits like these could be captured there as a place to go to look things up.I am not good at structuring WIKIs, but would be willing to help capture,