开云体育

For a remote site like that, perhaps a timer on the power source could turn it off at midnight for a minute or two and re-power.? Internal watchdog timers and such can force a re-boot of code, but sometimes a full power cycle is needed to clear a fault (eg: scr latchup).

----- Original message -----

From: Doug Ritchie <doug@...>

To:?[email protected]

Subject: [TinyTrak] Carrier Detect TT4 Yellow LED Constant On

Date: Friday, May 21, 2021 8:56 AM

My solar digipeater has been working well since last summer 2020.? Earlier in May this year it went silent for 10 days or so, until I was able to gain access to my fire tower installation 90ft. up.? I discovered that all equipment was operational except the TT4 yellow LED was constantly on; no flickering or blinking or off. ? Acted like the TT4 was locked up or frozen.? So I removed power to the TT4 and reconnected.? The TT4 immediately began working again and It seemed to work for a day or two and has gone silent again.? Before I get permission to go back again, any thoughts on a constant-on yellow LED?? Wondering if the TT4 needs to be replaced.? Thanks, Doug KF5BCX