Hello, good morning, it took me a while to respond to do several tests, and I sent some images.
I am connected to the tiny track with RS232 pins 2-3-5 with a null cable, I can read it and also load firmware 072 with the terminal, complete the process but when asking for MYCALL it should say nocall , and it is not, I send the images maybe it is better understood what could be the problem, thanks
Christian Guraieb
LU3VBC.-
El jue, 9 jun 2022 a las 1:38, Rob Giuliano via (<kb8rco=
[email protected]>) escribi¨®:
It appears that in TeraTerm you are getting:
??? ?
??? Press ESC 3 times to enter TT4 Options Menu
So you are connected to the TT4 and able to get into the option menu to try and send RESTORE.
I think this could be 1 of 2 problems:
1. Firmware is out of synch with your settings
??? You can use the TT4 Configuration to send the latest firmware and start from scratch.
??? Latest is 0.72 (I think) and can be downloaded from the Byonics website.
2. Itmight be an issue with voltage levels.
??? In order to confirm we need to know a little more information:
??? What device are you using to connect the TT4 to the computer?
??? a) Byonics TT-USB? ?
??? b) Other USB- Serial device
??????? Best to specify and whether it is RS232 ot TTL?
???? c) Are you using Bluetooth?
?
??? Which port are you connecting to?
??? a) Port A (Pins 2, 3, and 5)?
??? b) Port B (Pins 7, 8, and 5)?
On Wednesday, June 8, 2022 at 02:06:07 PM EDT, Cristian Guraieb <
guraieb@...> wrote:
Hello good morning, I have a tiny track 4 which worked well, at some point a TT4 config is loaded to do as digipeter, from PY4CEP-14, now I can't delete that configuration, I use the tera tem, and the tiny track does the cycle of it loads, but nothing changes, I can't do the RESTORE command, and MYCALL SAYS: PY4CEP-14LE loads my badge and it doesn't change. I tried various operating systems win 107 and xP and still nothing, I use a serial cable with null modem . Any suggestion? Thank you very much Cristian LU3VBC.-
Hola buenos dias, tengo una tiny track 4 la cual funciono bien , en alg¨²n momento se cargue un config TT4 para hacer como digipeter , de PY4CEP-14, ahora no puedo borrar esa configuraci¨®n, uso el tera tem, y la tiny track hace el ciclo de carga, pero no cambia nada , no puedo hacer el ?comando RESTORE, y MYCALL ME DICE : PY4CEP-14 LE cargo mi distintivo y no cambia., probe con varios sistemas operativos win 10 7 y xP e igual nada, uso un cabe serial con null modem. Alguna sugerencia? muchas gracias Cristian LU3VBC.-
.jpg)
.jpg)
.jpg)
