Eric,
I will test it.
I assume the 5000 cycle burst is at a single frequency, similar to whistling into the microphone. To measure the peak power while I am speaking would I set the start and stop frequency to correspond to the voice channel - for example START 50.100000 MHz and STOP 50.103000 MHz?
How did you set it for such a fast scan time of 1.9 ms?
Mike N2MS
toggle quoted message
Show quoted text
On 12/16/2023 6:37 AM EST Erik Kaashoek <erik@...> wrote:
Here a 5000 cycle burst of 50 MHz (1 ms)
