开云体育

Apologies if this is in the wrong place, direct me and I'll move it.
I'm rebuilding a 492BP using parts from multiple other units and currently short of some vital bits.
I need a preselector and it's card, a phase gate module and 119-1579-01 which I think is a late version 3rd convertor. I also need a psu , preferably with a gpib on the back. I have an early 492 one but the motherboard on this late model is half an inch longer at the rear so doesn't fit correctly. Parts or a doner are OK. I could probably make do with a non working psu and try and get it going. Happy to collect if not to far. Nick. G0WEF.

Hello,

I have at least the following :

- Phase gate Assy : PN 119-1010-02
- Power supply with GPIB : PN 337-2553-04

These parts were OK when saved as parts some years ago

I must check tomorrow morning in the stock if I have also a 119-1579-01 and a preselector + its driver card ( have you the Part Numbers of them? )

I am not located in NorthWest UK but in France

Best regards
Eric

Hello Nick,

I have at least the following :

- Phase gate Assy : PN 119-1010-02
- Power supply with GPIB : PN 337-2553-04

These parts were OK when saved as parts some years ago

I must check tomorrow morning in the stock if I have also a 119-1579-01 and a preselector + its driver card ( have you the Part Numbers of them? )

I am not located in NorthWest UK but in France

Best regards
Eric

Ok Eric. Thanks for the reply, keep me posted about what you find. Not sure I can collect but we can look at postage.
Nick

OK
One last question : Do you have the Part Numbers of the preselector and its driver board ?
Eric

Hello Nick,
I think I have found in my Tek spare parts , all the items you are looking for
I will send you a direct message with the list and some pictures
Best regards
Eric