开云体育

Sorry for the vague post, but I remember in the last year or so, somebody giving a detailed description on how the Tektronix front panels were produced for durability, with respect to anodizing, silk screening, etc. Probably Dennis? or Chuck? … I rummaged through my archives but didn't find the post. If the author remembers it, maybe they can link it in this thread?

I did find some older posts by search though, but I think the one I mean is much more comprehensive.
e.g. /g/TekScopes/message/111625 ; /g/TekScopes/message/101696

Thanks for any help.

Hi Toby,
You are in luck.
There is an excellent video on how Tek did this on the vintageTEK Museum web site It is here:


Dennis Tillman W7PF

On 2018-07-10 10:58 PM, Dennis Tillman W7PF wrote:

Hi Toby,
You are in luck.
There is an excellent video on how Tek did this on the vintageTEK Museum web site It is here:

Thanks very much! I am pretty sure there was also a detailed post on
this list as well.

--Toby

Dennis Tillman W7PF

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
toby@...
Sent: Saturday, June 30, 2018 1:41 PM
To: [email protected]
Subject: [TekScopes] Searching for post about Tektronix front panel
fabrication/printing process

Sorry for the vague post, but I remember in the last year or so,
somebody giving a detailed description on how the Tektronix front
panels were produced for durability, with respect to anodizing, silk
screening, etc. Probably Dennis? or Chuck? … I rummaged through my
archives but didn't find the post. If the author remembers it, maybe
they can link it in this thread?

I did find some older posts by search though, but I think the one I
mean is much more comprehensive.
e.g. /g/TekScopes/message/111625 ;
/g/TekScopes/message/101696

Thanks for any help.

On 2018-07-10 10:58 PM, Dennis Tillman W7PF wrote:

Hi Toby,
You are in luck.
There is an excellent video on how Tek did this on the vintageTEK Museum web site It is here:

Ah... I watched this a few days ago -- this doesn't cover the
manufacturing details though. Just the design/mockup process.

--T

Dennis Tillman W7PF

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
toby@...
Sent: Saturday, June 30, 2018 1:41 PM
To: [email protected]
Subject: [TekScopes] Searching for post about Tektronix front panel
fabrication/printing process

Sorry for the vague post, but I remember in the last year or so,
somebody giving a detailed description on how the Tektronix front
panels were produced for durability, with respect to anodizing, silk
screening, etc. Probably Dennis? or Chuck? … I rummaged through my
archives but didn't find the post. If the author remembers it, maybe
they can link it in this thread?

I did find some older posts by search though, but I think the one I
mean is much more comprehensive.
e.g. /g/TekScopes/message/111625 ;
/g/TekScopes/message/101696

Thanks for any help.