Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Looking for Tek 2445x 2465x Fan assembly parts etc.
|
Hi Group,
I bought a Tek 2445 scope at the Dayton Hamvention. One of the previous owners had removed the complete fan cooling system ;-( I am in need of the following parts: The A10 circuit board assembly 670-7390-00 This includes the motor. This part is common to 400 series scopes like the 465, 475 etc. The fan blades 369-0043-01 The collet 343-1040-01 Any help would be appreciated. John VE3XRY |
|
Tom Jobe
¿ªÔÆÌåÓýHi John,
I have a little bag of burned up fan parts here, and the only
part in common between the 4xx and the early 24x5 fan assemblies is the bare fan
motor body. The circuit board, the fan, and how?the fan?attaches to
the shaft are all different, as is the fan assembly mounting.
The two fans run on different voltages too, one uses an
unregulated 15 volt line that is about 21 volts as I remember, and the other
runs on maybe 15 volt regulated supply. Don't hold me to this, as it has been
awhile since I messed with those fan assemblies.
You need the complete early style 24x5 fan assembly, or maybe
you need to look at using a modern flat computer fan like the later 24x5's
had.
Maybe you will get lucky and Victor the 24x5?master, will
weigh in on your fan problem.
tom jobe...
?
?
?
?
?
|
to navigate to use esc to dismiss