开云体育

Wondering if anyonewho has a "spares" 465, 475, or 485 would be willing to pull a couple of the LEMO power jacks from the back (the four pin jackused to power Tek probes that use +/-15VDC) for me. I want to build a stand alone power supply so I can use some of my power-required probes on my 2465B, which aren't equipped with them.

email is K7WXWatqrpdxdotnet or message me here.

Thanks!
Bill

I realize that it is more fun to build something from scraps and spares but have you considered finding an 1101 or 1101A lemo probe power supply?

GM Clark -

Buying a 1101A would definitely be more practical but building stuff is fun. It is, after all, why i have all this gear in the first place. If I fail, the 1101A is the fallback option (and, yes, probably cheaper in the long run).

Cheers,
Bill

GM all -

Someone from the list has responded to my plea for assistance and I have a couple of the required connectors on the way.

Cheers,
Bill

The power supply on a 2465 has 2 four pin connectors to power optional Lemo jacks on the rear panel of the 2465. No new power supply needed, just a jack, board connector, hole and some wire.

I didn't know that. I just went through the schematics and some photos of the A2 board and found the connectors. It should be an easy upgrade. Thank you for the assist!

Bill