Keyboard Shortcuts
Likes
Search
Tektronix LA501W Logic Analyzer Manuals
|
Artekmedia
开云体育?? :-)( It is now 4:30AM ... I will be out of the office after 6:15AM? for the day) dave On 10/12/2012 4:31 AM, g_kupka wrote: ? -- Dave Henderson Manuals@... PO Box 175 Welch,MN 55089 651-269-4265 |
|
GKupka
toggle quoted message
Show quoted text
|
|
Artekmedia
开云体育Ahhh I missed the "W" on the end ...too early in the morning ....off to find some coffeeDave On 10/12/2012 4:47 AM, GKupka wrote: ? -- Dave Henderson Manuals@... PO Box 175 Welch,MN 55089 651-269-4265 |
|
Artekmedia
开云体育GerhardI have looked all over and all I find are operator manuals for the LA501W ( I can get you one of those but will take a few weeks)? ...As I vaguely recall the LA501W was basically the pairing of the LA501 and the WR501 with some kind of "interface wring kit" , probably through hard wiring the connections in the back plane of the TM5xx and dedicating the two assemblies to the slots they reside in. I think if you ar going to service this then a LA501 and WR501 service manual; are what is available , I don't think there was a dedicated service manual for the pairing Dave ArtekManuals.com On 10/12/2012 4:56 AM, Artekmedia wrote: ? -- Dave Henderson Manuals@... PO Box 175 Welch,MN 55089 651-269-4265 |
|
Artekmedia
开云体育GerhardTo further confirm this the rear interface connections for the LA501/WR501 are described in detail in the TM5000 Rear Interface Guide Book 070-2088-04 Gotta run Back tonight Dave On 10/12/2012 6:31 AM, Artekmedia wrote: ? -- Dave Henderson Manuals@... PO Box 175 Welch,MN 55089 651-269-4265 |
|
Artekmedia
开云体育To further cement this here is a picture, looks like more than back pane wiring?Dave On 10/12/2012 6:31 AM, Artekmedia wrote: ? -- Dave Henderson Manuals@... PO Box 175 Welch,MN 55089 651-269-4265 |
|
The LA501W is an LA501 + a WR501 word recognizer in a separate plugin. I believe there is a side-mounted connector in both units so they can mate up & then install into the mainframe as a unit. The WR gives additional triggering capabilities but the LA501 will still work without it. The LA alone has 16 3-position toggle switches which can be set for 0-1-X. So, you still have a single-level trigger capability for True, False, Don't Care combinations of the inputs. HankC, Boston |