开云体育

Hi:
I bought a SG504 RF Generator on Ebay with NO Output Head.
Anyone have a Source for one at a Reasonable Price?
The Part Number is 015-0282-00.
Also Looking for a 012 0482 00 50 ohm precision bnc Cable, can this
cable be constructed?
Any info would be appreciated.
Thank's
Rod.
Amatuer Radio Callsign:
VE5RMK

I bought a SG504 RF Generator on Ebay with NO Output Head.

Situation normal. Liquidators shove the equipment in one pile, and anything
they think is a "lead" they shove in another (or worse, in the dumpster).

Anyone have a Source for one at a Reasonable Price?

Hah! Good luck for the "reasonable price"! They seem to go on eBay for
about as much as the generator, because of the liquidator nonsense - there
are far more SG504's around than there are levelling heads.

Also Looking for a 012 0482 00 50 ohm precision bnc Cable, can this
cable be constructed?

It can be bought from Tek - still in current production. I have one, and
ran some tests on my 1502 TDR on highest sensitivity settings. I could find
no difference between the Tek precision cable, and a decent cable from the
usual sources (in the UK either Farnell or RS [RadioSpares and *not* Radio
Shack]). So I suspect that a decent general purpose cable does just as
well.

Craig

Hi Rod,



I took a look in my extensive archive file for a Data Sheet on the
012-0482-00 and found no reference to it at all. I was hoping a Data Sheet
on it would at least tell me what kind of cable is used in it. Tek had Data
Sheets on virtually everything with a Part Number like 012-0000-00 so I will
keep looking and post any info here that I uncover.



Stan



PS I think Craig is correct in that it probably really does not make any
practical difference in any measurements you might make using it instead of
normal RG58 and ordinary BNC connectors.



_____

From: TekScopes@... [mailto:TekScopes@...] On Behalf
Of kozey746
Sent: Sunday, September 28, 2008 10:45 PM
To: TekScopes@...
Subject: [TekScopes] A little off Topic, SG504 Output Head



Hi:
I bought a SG504 RF Generator on Ebay with NO Output Head.
Anyone have a Source for one at a Reasonable Price?
The Part Number is 015-0282-00.
Also Looking for a 012 0482 00 50 ohm precision bnc Cable, can this
cable be constructed?
Any info would be appreciated.
Thank's
Rod.
Amatuer Radio Callsign:
VE5RMK