Hello All,
I have the following odd Tek plug-on adapters, fixtures, and
connector boxes if anyone needs them for a minimal price (or can let
me know what they fit). Can't seem to figure out what most of them
were used on.
011-0081-00, Blue box with BNC(M) and BNC(F) connectors on ends. Has
a small glass diode in series with the center pins. Fedlog says used
on 9020 equipment.
017-067, 50 ohm CHG. NET, 5 uS, 0.05uF, 874 type connector with a
banana ground pin 1-1/8" away from center.
067-0529-00 Calibration Fixture, 1000:1 divider w/switch, BNC(M)clamp
fitting and BNC(F) on ends.
B52R Terminating Resistor, 1.5 WATTS, 52 Ohm, UHF M & F on each end.
Blue and Clear scope cover for 56x/647 series. Small (1" size) cuts
near the lower back right corner (near power connector location?).
Otherwise good condition.
Regards,
Jim Reese
