开云体育

Hello to all,
I was wondering if the K212 cart is okay for use with a 475 scope. TekWiki says the cart is primarily for 2000 series scopes, but it looks like the 475 would fit.
Thanks,
Tony.

I've never actually tried a 465 or 475 on a K212 cart, but it should work. The K212 is wider than the older carts used for the 475 et al and it has the u-shaped channel in the front to receive the 'scope's front feet.

DaveD

Hi Dave,
Thanks for the reply. I spotted a nice K212 on Craigslist and jumped on it. The 475 fits! The U-shaped channel is missing so I will have to come up with a replacement.
Regards,
Tony

Did your cart come with the original hold-down straps? I have yet to see a second-hand cart with those unless it came directly from the original owners.

You can probably find something to use for the u-channel. How about a short piece of double-wide track used on track shelving?

DaveD

Yes, it came with the straps which can be positioned in front, center, or rear slots in the tray. Will have to play around with it a bit, as my scope has a DM44 and accessory pouch on top. I will need to replace the 'retaining bar' to secure the scope feet to ensure it does not slide out. Looks like plain aluminum channel. The K212 manual on TekWiki lists the part as BAR,RETAINING:11.6 L X 1.0 W X 0.375 THK,AL CH,6063–T52