开云体育

That's a familiar name, was He the fellow who owned Blue Feather Technologies some time back? If it is, You sure found the right Guy! Mark

SUPPLEMENT 7 Official Tektronix recipe for 120-0360-00: Pri 1 1-2: 3T #26 AWG Pri 2 3-4: 2T #26 Sec 1 11-12: 3T #26 Sec 2 5-9-7: 0-542-1100T #38 Sec 3 6-10: 582T #38 Sec 1 insulated to 2KVDC Sec 2 and

Thank you! Dave Wise ________________________________________ Sent: Tuesday, November 05, 2019 3:43 PM To: [email protected] Subject: Re: [TekScopes] vintageTEK scanned transformer drawings for

The drawings for the -197 and -360 have been added to the file. Dave

The file has been updated to add the -197 and -360 drawings.

I have a TDS3054 I bought new 20 years ago and I never noticed how dim the display had become over the years. I was able to replace the CCFL tubes with new ones and it made a huge difference in

Having finally beaten my TDS3054 into submission (ALL tantalums and electrolytics changed), giving once more a reliable scope, I am after some extras. I would like the extension module that allows

All, I have added a few photos of the J20 UV fiber optic sensor and mounting ring adapter to the TekWiki 7J20/J20 page. DaveD -- This email has been checked for viruses by Avast antivirus software.

Hi I have used - https://www.ccflwarehouse.com/ replacing in e4406A --just shipped the old ones and they made the replacement the right size. Hardy -----Oprindelig meddelelse----- Fra:

This is the first item that came up when searching for CCFL LED replacements https://www.ccflwarehouse.com/ no idea if they have anything that will fit. I have made CCFL replacement strips for some

I'm going to miss your knowledge and insight, Craig.BTW, I didn't think your post was rude.? Perhaps my own "noise floor" is rather high? ;)Jim Ford?Sent from my Verizon, Samsung Galaxy smartphone

" there are commercially available LED backlight kits to replace the CCFL lamps. " I would be in your dept if you could point me to an LED replacement for the fluorescent tubes in the NEC displays

Thanks for your interesting contributions Craig! Albert [Perhaps I can provoke you to write one more message. The message counter shows about 161,400 messages. Then your 4,600 contributions form

FWIW Please don't change the subject of the thread - it remains the same thread. Instead, please start a completely new thread (i.e. don't use reply). David

Tom, Thank you! At the risk of aggravating some readers, I'll say that I think that by sharing these viewpoints and perspectives, some people (hopefully most) will alter their mindset and approach and

Many thanx for all your endless contributions in all those years Graig. And it will others giving a hard time to do the same at that level of always in detail trying to solve the problems. Have a good

Bruce Lane will read the EPROM for me. He is nearby. Dennis Tillman W7PF

We've all appreciated your input! Cheers and happy trails! -Dave

Hi Grant- Thanks much for your thoughtful post! From reading the messages in this thread, it appears that the source of disagreement is the fact that different folks experience a very different level

Seconded. DaveD Sent from a small flat thingy