开云体育

What is the Tek part number prefix for BioParts?

It is surely an old spider. But with the right Tektronix part number, one may find it at ebay.

Had a strange problem earlier. I have a 7904A fitted with 2x 7A26 and I suddenly found the probe x10 sense wasn't working on just one of the CH1 PI inputs (the same probe was checked on all four PI

I had an intervention at an ATM where a mouse was caught by the straps that carried the money.I laughed with my colleagues that when it released cash it gave: a banknote, a mouse, a banknote, a mouse

I spent a month last year demousing a convertible after taking it out of storage. Besides having to strip out the entire interior, I had to replace some of the A/C components because the mice ate the

The biggest thing that got into my plugins was my cat. I left a 1S1 on the ground like a slob and my cat wanted to sit on it. As he tried to get on top he used one of the tubes as a foot(paw?)-hold

Spiders in the plugins? That's nothing! I don't think mine would work without the spiders and the stinkbugs. For me, it is usually some critter trying to pimp my ride with modifications to the vacuum

Found him, thanks. 73, Dick, W1KSZ ________________________________ Sent: Monday, June 29, 2020 8:04 AM To: [email protected] <[email protected]> Subject: Re: [TekScopes] What's the Tektronix part

Ah, yes! It looks like it has fallen in love with a Posidriv screw-head. Perhaps there are more and would they have different part-numbers dependant on where they are?

I stopped looking when I found a spider husk in the lower left, near second row from bottom of front panel knobs/pots. probably two of 'em. -- John

Look 210mm from the front panel and 91mm from the base. I think it may have been trying to calibrate some function..

I think it's sitting on a green-ish pot(?) just to the center/right of the picture. Thanks, Barry - N4BUQ

Where is it located ? 73, Dick, W1KSZ ________________________________ Sent: Sunday, June 28, 2020 10:41 PM To: [email protected] <[email protected]> Subject: [TekScopes] What's the Tektronix part

https://photos.app.goo.gl/8esDSfBZB6YwKGjQ9 Hello to the group, Any suggestions what could be causing this sort of blur which is modulated by the signal? It's strange fog. When I had this Telequipment

For Tek probe questions I refer all to Tekprobes group. Some very savvy probe folks there…. Steve Lindberg Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

Hi leo Thanks once again for guiding me through repair process. Regarding the voltage issue you are right that my power supply has poor regulation. As you suggested I will try my best to replace those

They are more likely to explode when fed 230 V ~, and that is often what comes with 50 Hz (I know, not in east Japan, Jamaica, Cura?ao, Bonaire, Barbados, and a few parts of other countries). If they

Hello Saroj, this is a good start! You confirmed your scope has the typical issue, it's almost always the primary power supply with problems. The Power Supply are basically TWO switching inverters

Hi Tom, Sorry, yes you're correct, that'll teach me for posting late at night! Unfortunately, I don't have access to an ESR meter, however the need for one arises often these days so perhaps it's time

That spider is definitely screwed :-) Rick