开云体育

I need to purchase the connector used on the end of the cable of the PD keyboard that attaches to the front panel of the 4041. It looks like a 4-pin LEMO round silver connector. I cannot find this

Sometimes the "service manual" is built into the appliance. In nearly every washer, dryer, dishwasher, frig, microwave, and HVAC thing I've worked on (many dozens of items) over the years, I have

Walter's cable is probably for a word recognizer probe for the 2400 series scopes, which uses the same 6 pin LEMO as the tracking generator cable, but only on one end. BTW, the tracking generator

My problem like this was with a dishwasher. A good one - I’ll name names; it was a Miele. A design feature that was quite good was that the intake valve for the water supply was external and located

With the 32v supply at 30v, the +/-5v readings make perfect sense as the reference for those two regulators is the 32v supply. [30/32x 5] = 4.68v Check the DC and AC voltages across C721. You should

I assume you mean charge level, not wear-out or old age condition? Charge level can be measured (to a certain degree as voltage per cell) by measuring voltage under load but AFAIK, the THS700-series

I think two of them are larger than 200 MB. I've reduced many Tek manuals that were over 200 MB to 30 - MB with hardly any loss of quality. If you send me an unlocked version of one of those, I'll see

That's my preferred method: The OCR part is a separate "invisible" layer. Raymond

That cable has Lemo connectors on both sides. Raymond

I think the 6 pin Lemo cable was used to connect the TR-502 Tracking Generator To a 7L13, Walter. I remember reading a post by Dennis too. Mark

The electronics shop in the physics lab where I once worked just used the outer part of a BNC cable connector (removed from a connector which had had its inner portion's fingers messed up). It works

Bruce, I wouldn't mind owning one of those BNC wrenches, but the link you gave doesn't ship to the UK. There is one on eBay which looks the same, but the shipping to the UK puts the cost up by an to

if anybody can use one,, I found another new 6 pin Lemo circular connector to tinned end cable from Tek, 20" long. I believe Dennis said these were used to link to the TR50x style tracking generators,

That's a slippery slope- you eventually end up with more than could possibly need or use.? Ask me how I know... ;-) -Dave

Tim, Thanks for the info. I don’t “need” one at all. I have more than enough scopes for my actual needs. I just think it looks cool. This particular model is also quite rare in Europe, and

Hi All, Being the proud owner of three 556's, (and four 555s), I can give you some historical info, $25 (2010) and $200 (2012), both were functions and extremely clean and populated with plugins, the

Tgerbi, Here's my ABBYY example of the 2445 manual section that you scanned, Tektronix Serial/Model No. Component No. Part No. Eft Dscont Name & Description Mfr Code Mfr Part Number A3R1063

When it comes to safes, like lock pick sets, there is a very real fear that less than honest folks will use the information for less than legal purposes. Now ask me about TE manufactures who keep

I've followed this topic with interest for a while now. I am not at the electronic level, circuit wise that most of you are. I have had a furnace controller go out over the years and unfortunately