开云体育

Yes, I just copied an old Heathkit HW-20 manual by removing the comb and copying the manual and the fold-outs page-by-page. Re-assembling the manual took a long time because the pages were somewhat

Ok, I see Lyle is getting it.

I bought one of the mechanical perf/bind machines for short money "over there". Shipping cost as much as the machine !! But it works very well, up to a 2" spine. Just look for GBC Binders. 73, Dick,

A search for " plastic binding combs 19 " (19 holes) shows this for instance: http://www.binding.com/productdetail.aspx?id=6202021901 Albert

Is somebody in the SF bay area going to pick this up? I can arrange for a relative to get it rather then have it scrapped. Bob

ibico is the company that makes them here in the U.S. ? I have a couple perforating/assembly machines and lots of plastic comb bindings. You almost need?the machine to put the pages in the comb, or

I did a search on the web for "white plastic binder spines" and got quite a few hits, too numerous to list. I often have one of the local Kinkos bind manuals for me using black spines; never asked if

I get mine at Office Depot, but there are numerous sellers over on the "evil empire" !! Look for GBC Binders. 73, Dick, W1KSZ

Troubleshooting a bouncing trace on an SC502. Narrowed it down to the transistor string on the F&I board. Figured one was getting hot, since the trace didn't start bouncing until after a sufficient

anyone have a source (either UK or US) for replacements for the (frequently brittle/broken) white plastic spiral binders used to hold the Tek instruction manuals together My 7704A manual is now a

Excellent. -Kurt

"sipespresso" <sipespresso@...> wrote: I replied to his offer - and said I'd be glad to give it a good home. I live only minutes away from San Mateo... Cheers, Lyle -- Bickley Consulting West

Looks like a 7514? Mark

I have no affiliation with the seller. http://sfbay.craigslist.org/pen/ele/3611350951.html What model is it? -Kurt

Agreed - Fire Hazzard.

Hi, I admire your work. Did you use the A.G. Schaeffer panel maker? Jerry Massengale

Hi, I recently used Alberts load value to build a load for 3 7704a power supplies that were not working. I added a 3k load for the hv drive lines. I found that one of the power supplies would not

You will need to buil

Funny - i reversed engineered the bootloader API during the last days, without knowing that you did the same half a year ago :) I posted my program + description in the tek forum, look here for the

Hi Charlie, In addition also have a look in the thread of message #83499. Albert