开云体育

Hi All: I just found a working R7844 with 7A26, 7A24, and two 7B85 plugins. I was in a pawn shop and saw it on a shelf in the back room. I asked the owner and he said it had been sitting there for 5

Does a vertical amp anything useful together with a 7D20 in a 4-bay mainframe? Not that the 7D20 in a 7934 makes all that much sense to start with..... Looks like a bit of a mix, but should be a good

I have no affiliation with the seller. I emailed them an confirmed that they are asking for $160. http://sandiego.craigslist.org/csd/ele/3280497953.html -Kurt

http://www.wimp.com/acousticlevitation/ -- Dave Henderson Manuals@... www.Artekmanuals.com PO Box 175 Welch,MN 55089 651-269-4265

Peace be with you, all is forgiven. Don Black.

Thanks, I will ask for a quote. Based on the datasheet, it looks like this part may be very expensive! Rich From: TekScopes@... [mailto:TekScopes@...] On Behalf Of David

I've got a Tek2205 which has been dropped and abused by the previous owner (I believe it's from a lab and the workers there did it to the scope when the lab was closing down). However the inside of

Hello Brad, I sent you an email regards Gerhard

Not sure if you can get one here, but you can get 5.? I've used the source before without problems:? http://www.ic-on-line.cn/search.php?part=CLC561AI&stype=part

Looks like the CLC561 is available from utsource.net, but you'll have to ask for a quote.

I have attached the horizontal amplifier schematics (both for high & low serial numbered units) & the A/B trigger generator schematic. These are the missing pages from the manual that is available for

Hello-- Please accept my apology-- I had no intention of responding to the entire group instead of Gerhard. 73-- Brad AA1IP

Hello, Gerhard-- Thank you for your inquiry regarding the Tektronix C1001 camera. Shipment via USPS international Priority mail, in a medium-size flat-rate carton will cost $47.95, to which I would

Hello All: I am trying to repair CH1 on an AFG2020 I acquired some time ago. I have isolated the problem to a ComLinear CLC561AI amplifier located on the A42 output board. I cannot seem to find this

Hi George, I forgot to attach the knob pictures, sorry about that! tom jobe...

FYI - I have no affiliation ... Dave

Gang, I’ve taken Tom’s dimensions and converted them to a scale PDF. I then printed the 1:1 drawing on a laser printer, cut it out, and dropped it on top of a 177 test fixture to test the accuracy

Hello Brad, can you make a picture fof the camera anf send it to my email address - ghm1@... - Thank you. Gerhard

Hello Brad, How much are the shippimg costs to germany with USPS priority mail? Many thanks. Gerhard

Richard Loken <richardlo@...> wrote: I just ran it through bing (fka Alta Vista Babelfish). Timebase became database. It's not really any better. -ls-