开云体育

Is this really an all-male list? Bummer. Excerpt from my list @ http://www.slack.com/david/temodel.html : Tektronix A6302 DC current probe 50MHz 20A Tektronix A6302XL DC current probe 17MHz

Hi all! 1/2 drop of lubricant on the shaft instantly solved the problem. Pot turns perfectly now --like new. Thanks to each of you who suggested less drastic measures than replacement. Steve

Darrin If you don't manage to find a 0861 CRT then in most cases you can use a 0731 tube from a 465/465B/468 which is more likely to be available. However there are a couple of caveats - -The 0731

A renewed search of my Digikey catalog has part number 381N505-ND. ($13.35). This is a Clarostat 1 Watt conductive plastic linear pot with identical mechanicals to the original, which was also a

Lubricate the shaft where it enters the body of the pot with contact cleaner. Turn the pot. Repeat as necessary. You will probably find it only takes one or two tries to get enough penetration to fix

Yes it is worth doing because I tried just one mispelling and found a scope. Here's the link: http://cgi.ebay.com/ws/eBayISAPI.dll? ViewItem&item=3802275078&category=45005 regards, Benoit it.

Hi all! I am in need of a new "focus" pot for my Tektronix 475 scope, serial number B278849. The part Identifier is R1380. The Tek part number is 311-0075-00. Description is: Res., VAR, NONWIR: 5M

Greetings All, I would like to inquire if anyone in this fine group of ours has a CRT for a Tek 2235, or 2236 for sell, or trade. The part number on the CRT is 154-0861-00. I received this 2235 from

<mister_twister@p...> wrote: called "Tectronics". ---------- There is actually a real company which spells the name just like Christian initially did. It's in UK and deals with home

In the movie, "Diamonds Are Forever" they have a company called "Tectronics". I believe I have it spelled the way they have it in the movie. I'm to lazy to pull out all my James Bond movies (and I

I used to have a standard eBay search that included a lot of the common mistakes. Here's 20 to get y'all

Change all the filter caps in the power supply - they are getting old and worn out - that will fix it! Always use 105C rated caps as they last much longer (the last ones worked for 20

has anyone seen this when the scope is first turned on and a signal applied there is what looks like ac ripple on the top of the trace but after a minute or so it gradualy shrinks and goes away

(Data I/O), so much more reason to be careful. Possibiliies are infinite and have to watch for fine print (manufacturer, IC revision, algoritham revision etc.), or you will fry the

I did not bid against you, but not for lack of want, it was a lack of opportunity. Regards Miroslav Pokorni

Hi All, If the 2716 is a problem, you might want to go for the CAT28C16 EEPROM This one is pin-compatble and still avalable from Catalyst (or any other 28C16 which you can get) Fred de

Hi, Miroslav, * REPLY SEPARATOR * <g> Programming is the least of my worries. When Data I/O designed the Unisite, they designed it to be 'pin driven.' This means that each pin

Greetings,.....nuts!!!......just when I find an item that slipped past most..........there will Miroslav bidding against me!!!!! I have another good search secret tip.........but it's

Interesting and good price rare item lurking on eBay at the moment. A 7514 storage scope - I had no idea that Tek did split screen storage into the 7000 series until I saw this. 90MHz

I worked for a company called Scientific Generics at one stage, and received a letter from a pharmaceuticals company addressed to Cystic Genetics. Sounded very painful to me... Craig