开云体育

Hi Jerry, Why couldn't you use a blank electrical box cover from lowes hardware? Cut to size of course. Chris

Tektronix 2230, identical to 2220, less a few switch options, working, voltage across R907 0.23Volts JC

On 01/25/2012 10:03 AM, Jerry Massengale wrote: Tek No 016-0155-00 > Hi, > > I know what you are talking about. I have a couple but want something cheaper for resale. Thanks. You mentioned

Hi, I know what you are talking about. I have a couple but want something cheaper for resale. Thanks. jerry Jerry Massengale jmassen418a@...

Tek No 016-0155-00 ---------------------------------------------- What are blind panels? Where do you get them? Jerry Massengale jmassen418a@... -- Empfehlen Sie GMX DSL Ihren Freunden und

Anybody knows what is the bandwidth for Wavetek 5809A spectrum analyzer?

to fill/close empty plugin front space maybe i will find the tek part number again got where, i got mine from ebay Peter ===================================== Hi, What are blind panels? Where do you

Hi, What are blind panels? Where do you get them? Jerry Massengale jmassen418a@...

I published two photos from the those 3 silicon chips inside. One driver, two similar power amps. Will try to get bigger magnification, localize the failure... Cheers! CT1DGN The LINK:

Nice work reclaiming those ceramic strips. What a simple solution. I imagine that it would be best to clean the ceramic very well prior to gluing.

If you emailed in the last two weeks and did not receive a reply , please email me direct today. DO NOT PLACE REQUESTS THROUGH TEKSCOPES !!!!!:-) I will be chained to the computer all day today and

Heinz ...please resend Dave -- Dave& Lynn Henderson Manuals@... www.Artekmedia.com PO Box 175 Welch,MN 55089

Dave, did you received my mails, too ?? Or are they gone to nirwana ..... Peter =========================================== Dave et all We at Artekmedia alive and well...but buried in a host of

Dave et all We at Artekmedia alive and well...but buried in a host of issues. Been flying back and forth to Florida twice a week trying to get my mother in-law placed in an assisted living facility (

Quote: Back to the +50V supply: It's a little risky, but I'd suggest to remove Q876, monitor the +50V output with your DVM, and power-up the scope. ... I agree. For the next step, I would simply pull

me too. ? hope Dave is ok. ? -Don To: TekScopes@... Sent: Tuesday, January 24, 2012 11:55 PM Subject: [TekScopes] Paging Artek Media ? Speaking of Artek, has anyone heard from Dave

Hi Tom, Thank you for the detail of the problem which is similar to my tek 2220. I am still unable to nail down the problem. I believe the scope is working normally, because when it fires up it works

I've had that happen too but it appears if you hit Reply. Arden

He's around... I just got a couple of manuals from him a couple of days ago. -- john From: TekScopes@... [mailto:TekScopes@...] On Behalf Of Dave Casey Sent: Tuesday, January