开云体育

Hi to Both and Others, I hope Jerry will made the scans of the Mod Ducument. Nevertheless in the search for the right Manual see below: The first one:070-432 or 070-0432-00 Type W (SN 100-6999) :

Hi Jerry, I think scans of the Mod Document are highly appreciated. Thank you. Egge Siert

Folks, I undertook the replacement of the batteries in my DSA 602 this evening. All went well, with the removal and replacement of all three batteries. When the scope was powered back up, things

Here is really good reading on troubleshooting an oscilloscope. It is a Tektronix document, of course! http://www.sphere.bc.ca/test/tek-parts/troubleshooting-scopes.pdf

Hi Magnus, You didn't "amend" my recommendation, you added to it. I agree, your recommendation would be the next step. Power supplies must work properly for everything else to work properly. Arden

I would like to be considered if the shipping is reasonable, please. ? -Don ________________________________ To: TekScopes@... Sent: Monday, January 23, 2012 4:56 PM Subject: [TekScopes]

As others have suggested, check the physical connections at the CRT before you do anything else. tom jobe...

Does the trace compress to the left with both timebases? For the part which is not compressed, is the timebase still in calibration? Unfortunately I suspect the problem is going to be somewhere around

Hi All, I have a 545A, 3 pre-amps (Types CA, K and L) and 1L5 Spectrum Analyzer all on a 500/53A Scope-Mobile with manual (incl. schematics) that I would like to give to someone who will truly

I've one but wont be able to retrieve it until Friday, as I work in another school district 80 miles from the homestead. To be clear, it is the one with the Lemo connectors, correct? As a matter of

Hi David, At the 50 ns range, the slope of the TTH output is 5 V/ 50 ns. You have to set your viewing speed to 10 or 20 ns/div to see this nicely. At 5 us/div all you see is the stabilizing "DC" TTH

I just required a Tek 130 LC meter. A cute thing but it need some calibrating. I want to make a S30 but can not find a picture of the inside (strays seem to play an important role so I picture could

There's a copy here somewhere http://www.doughale.info/ Gordon

Has anybody got a manual for a 2901 time mark generator in electronic form they are willing to share Regards Colin

Albert, I can only think I'm not interpreting what I'm seeing on the 'scope screen correctly. I'm probing TP286 (output of TTH) with Sweep Range set to 50nS, 5nS/div in sequential mode. I have the

Hi, Update. Got them from Q Service Electronics, though they only had 3. Still need one more (if anyone has one). Thanks, Chris

Hello all, I have a Tek 7704A with no readout. Does any one have a readout board (No. 34) on lower left rear or scope? Is there a source I could contact for the board? Thanks much -- this group looks

Hi Patrick I'm very interested ,if live in Argentine is an options. Regards Pastor Mayor.

David, Is the display also distorted in store mode? If so, it might be a loose connection to one of the horizontal deflection pins of the CRT. --John Gord

Hi, My AFG5101 has started saying "battery low" when powered on - is that an easy thing to change? Also, the LCD contrast is very poor, as is the viewing angle - is there anything I can do about that?