开云体育

Thanks for the app. I'm just guessing... I don't have the hardware. But, it looks to me... and I might be wrong... that the curvebug app just polls the ARM for a data block, after sending a command

[email protected]> wrote: Cool, that's good. TBH I'm no expert at gauging ripple - maybe someone with actual old-school experience can take a look at the photos and pipe in here? At this stage you

Really impressive work! :-) I'm in the UK so I'll aim to find similar facility here, though I've only found fabricators who serve industry so far and I think they'll expect orders by the tonne, not a

Well..... So I took the case off and checked the voltages on J119 and they are all correct according to the service manual, but I'm unclear on how exactly you go about checking the peak to peak ripple

Will do. Wouldn't be a huge surprise to find bad filter caps, especially if they've never been changed.

[email protected]> wrote: IIRC the attenuators have a soldered connection to the preamps, or I would suggest switching them to see whether the problem follows an attenuator. All that being said, you

Oh no, NVM that I see that it's one of the hybrids, not a regular IC. I may try reseating that and see what happens. If you remove that and power the scope up with it out of circuit will that cause

That was the same thing I was thinking, now I just have to figure out what.... I wonder if I can take a small loop of wire and put it near the ch 2 preamp components and narrow it down to exactly what

Barry, How do you want me to get you payment? Mark ?? ----------------------------------. ? /? Don't take life so seriously, __/ ?/?????? it's not permanent.????? /

Hey Jason, From the photos you posted, I can see that: 1. The scope is triggering on the 850Mhz signal, meaning the trigger hybrid sees it. 2. The signal is *probably* internally generated, as

I have put the Windows source code out on GitHub under the MIT license for public use. It should be fairly easy for some skilled in the art of Linux to get it running on their OS of choice. It's just

Okay I'll try this. I couldn't upload the vid showing me switching through everything. Idk if any of these pics will help anyone see anything though. /g/TekScopes/album?id=302469

Barry- those look great!!!! Renée

They are pretty rare, particularly ones that fit a 2465x that has the DVM option. $110 is probably as inexpensive as you will find. That's slightly more than what I paid many years ago for my cover

Ebay, Sphere One on Ebay but not willing to pay a third of what I paid for the scope

Where have you looked? DaveD -- This email has been checked for viruses by Avast antivirus software. www.avast.com

Looking for the above

/g/TekScopes/album?id=302038

Mark, I have knobs and skirts if you need. Barry

I got knobs and Skirts for the SC502, SC503, and SC504s. The skirts came out perfect! See Photos /g/TekScopes/album?id=302038 Barry