开云体育

Thanks for the reply... After having spent some time going through the CPU/CTM schematics I am inclined to agree with you, it's more probably a mechanical connection problem somewhere. The un-read

See https://www.ebay.com/itm/234280743238 It has an alternative part number (Not my auction just a Google result) Sent via mobile annoyance thingy, please pardon any typos. [email protected]>

If your probes don't seem to be Tek or related to engine analyzers, then also look at HP's foray into laser interferometer systems, which had some transducers for barometric pressure, temperature, and

Here's the rest. https://w140.com/tekwiki/wiki/Engine_Analyzer_System Ed

I had to look. Here it is. Good luck. https://w140.com/tekwiki/images/a/a7/062-1074-00.pdf Ed

Are these Tek products? If so, look at the engine analyzer line from way back. One of the Tek "Concept" book series addresses this so may have some pertnent info. Ed

In my collection of probes, I have a P6610 physical measurement amplifier and three P6610 pressure transducers. I don't have any documentation and a search of the usual sources has come up empty.

Do I see a 27xx spectrum analyzer? Expensive for parts but for dirt cheap project maybe..... The rest is landfill.

I am here as well. <david.partridge@...> wrote:

Some of us don't do facebook... From what I can see, it looks like they want to get rid of that stuff as one whole lot. :-( -- Member of the toughest, meanest, deadliest, most unrelenting --

AFAICT I am now the only active moderator. I think we need some more moderators. Cheers, David

I recently upgraded my TDS3012 by ethernet, there is an page on the scope's web interface to input commands.

The Edison Tech Center is clearing out it's collection of old scopes and test equipment. If interested, check out https://www.facebook.com/marketplace/item/1006715277986797

Hi, the spot is always coming vertically outside the screen, when I change the polarity (about one graticule outside). I have tested the VertPos Adj pot but it is not enough to get the points back in

You know how sometimes the Universe just sends you signals, perhaps to remind you that you are on the right path? Well, this morning I received a phone call from the man who often supplies test

Check harmonica connectors from panel to other boards possible to reseat. Jon

Recently my Tek 2236 began giving a "Control Button Error" message, occasionally at first and now more regularly. Exercising the buttons does not seem to clear this. I ran the CTM diagnostic and

Hello, The truth is that I took a while to post because I didn’t have the money to buy the spare parts. I had to work extra hours for two months to afford them. I'm sorry.

In fact Mark, I actually have here a HV board with a blown transformer so I can grab the resistors from that . If for nothing else other than to see what happens? Thanks again

Thank you Mark. I'll look into that and let you know how it goes.. James