开云体育

Thank you Ozan. It’s been a long day, but I’ll make those measurements later on or tomorrow. (I’m 9h ahead of you). Il report back as soon as it’s done. Thanks again for your help.

Welcome! I’m also somewhat new. I’ve been here less than a year I think. Nice, great and extremely knowledgeable people. They always go out of their way to help mere mortals like me. You’ve

Glad you are here. You will be amazed what you can learn from this group. -- Michael Lynch Dardanelle, AR

Welcome, Joe!? You're in the right place.? ? ?Jim Ford?Sent from my Verizon, Samsung Galaxy smartphone

Raymond, The reasons that I suspect that <A> is an accessory for P6008 are: 1. the same lot of odds and ends contained a sealed Tek bag of accessories, that appears to have the same part in it along

Hello all. I have a Tektronix 475 that I have been working on. I've got it repaired electrically so now comes the mechanical repair. It has 2 good volts per div knobs but the silkscreend values have

Hello All, New member here. I have a Type 1L10 Spectrum Analyzer plug-in that I've owned for several years. It's nice and clean, however the previous owner removed some parts for some reason. It was

Hi, recently I have become aware of this group and the interesting topics discussed here. For more than 40 years I have been fixing almost anything as a hobby - from 1930s radios and all kind of TV

Hi Staffan, Search through our archives for "P6042". It has been a popular subject from time to time. On at least one occasion I remember someone suggesting an HDMI cable might work. Dennis Tillman

Hi Mike, At any time you are concerned about the number of posts go to our home page: /g/TekScopes and scroll down to the table titled Message History. If we are already at 1307 posts

Hi Raymond and Jeff, Raymond you are right. I magnified the picture and then the screw thread is clearly visible. The 131-5336-01 Part didn't have a screw thread. By the way my late P6201 (B082552)

A is a short-path-to-ground accessory for the P6201, definitely not for the P6008. B is a standard short-ground-connection clip, usable for almost all 6mm probes. D is a replacement spring-loaded pin,

H and K are accessories for HP probes; function is obvious. Raymond

I'm pretty sure F is a 206-0200-00, a replaceable probe tip for the P6201. Raymond

Ok. Don't know if I'm correctly visualizing the traces... (dumb newbie here). I've done X-Y and normal Grounded (no input) on one channel measurements with the two oscilloscopes I own. X/Y mode just

Mine actually get sent all over the place to several different folders with gmail, very annoying.

Hi Jeff, F is the Test/Signal/Ground Pin: 131-5336-01. To be used with the PQFP100 and PQFP132 Converter Clips. See pdf page 441 of the 1993 Product Catalog. Greetings, Egge Siert

Is it possible that the parts 'C' will go over the barrel of something like a P6008, without its 'hat', and touch the ground contact that can be seen through one of the slots in the barrel? Tim

Hi Jeff, L is the 196-2963-00: two wire lead set 3.1 inches long. Accessory for the P6464/P6465 (DAS9200 Series) Pattern Generator Probes. Greetings, Egge Siert

There are some excellent diagrams on pages 330-333 of the 1991 Tek catalog showing which probe accessories go with which probes for all the standard probes that were current at the