开云体育

From the 1984 Tek catalog, the portable oscilloscope selection, for everything with more than 50 MHz bandwidth, was (ordered by price): $1,200: 2213, 60 MHz, 2 channel $1,450: 2215, 60 MHz, 2

I managed to find a printed copy of this manual. I was surprised at its size - it is at least two inches thick. It is thicker than the service manual for the 7L5 spectrum analyzer. The 2336 brochure

Mine has arrived too, the other delivery to Australia, awaiting collection at the post office, which won't happen until next week as a I am away. Thanks again to Dennis and Peter. EJP

I suspect it's a combination of price, market demand, and the shift away from customer serviceability. Was it markedly more expensive for features that most buyers didn't have a lot of utility for?

VR764 zener is spec’ed at 12.6V +/-5%, with its variation +5.135V at cathode of VR764 is not out of range. Beam find diodes are still reverse biased with some margin. You may want to double check

I don't understand why the service manual for this particular scope is so hard to find, when the service manuals for older scopes are relatively common. This was not a particularly expensive scope for

No it does not goes to band 5? only to 4 upto 21GHz.

Dennis, Received book, guess just have to have extra patience when dealing with the Postal Service. Thank you for all of your extra effort. Eric, yes we are definitely in the same county. I’m

The guy that posted that ad definitively needs glasses, model was described as "233G".

I got at least one of the Canadian tracking numbers mixed up with another Canadian tracking number. These are the correct tracking numbers and their destinations and/or delivery status LH127124103US

My copy to Norway was delivered today. Much pleased with the quality of the book! BR. Thomas. ons. 20. jan. 2021 kl. 02:14 skrev momemeca <momemeca@...>:

Hello all! I've got a 7000 Series Standardization Plug-In 067-0587-02 that is acting strange. Sometimes the Gain setting on the TEST switch will show a compressed set of lines instead of the correct

Hi, Where is the service hours and power cycle statistic stored? Is it in the Dallas chip? I am about to buy 2467B which looks in excellent condition and was recently serviced. Since it shows only

On Fri, 22 Jan 2021, Mike Yepes wrote: Does it switch to frequency bands higher than 5? Bands for use with external mixers start with Band 6. > Hi, can Anyone help how to get higher frequency

Bruce, regarding your question about compatibility of this tester with TM5000 mainframes, I believe it should work. As I recall, the TM5000 mainframes can run TM500 plug-ins, but the reverse does not

Hi, can Anyone help how to get higher frequency displayed on this? Mike, KE6OJE.

Gary, Sorry to hear that - I thought you had your DDU repaired and that you booted from your DDU instead of the tape drive. I don't suspect the 4041 tape drive, although I would recommend using

At the back of the scope there is a BNC marked as A-gate. While applying your sine wave to channel 1, triggering on channel 1, connect A-gate to channel 2. Pick "chop". Move X-axis to see the

Thanks for all of your help. I have spent way more time and I'm out of my element and another O'scope for around $100 looks real attractive. At least this one is a parts source. I'm returning it to

Dave, Were you wanting a "SERVICE" Manual? Because this is an "OPERATORS" Manual. These are not typically used for repairs and do not always contain detailed repair information, at least not in any