开云体育

Hi Dennis: I PMed it... nothing that important. Roy

Hi, would also be interested in the same solution for an 1A4 plug in in a 547 scope. Thanks, Gordian

Tony, Does your 2465 include the GPIB option connector? If not - I don't think you can connect that scope to anything externally - controller or printer. I do see in the 2445/2465 Option 10 GPIB

Thank you for all you do! Most of us do not know exactly, since only few of us know how much work you do every day! Have a great weekend and stay safe all of you out there. Tony

Thanks for the info! I’ll put that on my list if I ever have a psu issue.

Thank you very much for explaining it to me! Somewhere I heard that it was possible, but now it is clear to me, thanks to you Siggi. Have a great weekend! Stay safe all of you.

Hey Tony, The 2465 is an analog scope, and the GPIB is only good for changing or reading back the settings on the scope. The scope itself has no idea what's displayed on the CRT, so you wouldn't be

This is why all of the groups I manage are set up so that the first two or three new member messages are moderated. On most of them, I also send a message to anyone applying to join, asking them about

Hi Roy, Did you forget to include what you wanted me to know? Dennis

Thank you for your reply. Is there an external printer I can connect to my 2465? Thanks. Tony

Hi Ernesto, Thanks for that link to the Triggering Fundamentals Application Note on the Tektronix web site. I have one disagreement with this AppNote after glancing through it. This is the most

Percentage-wise, the GPIB power is probably no big deal. I don't know how the GPIB option is connected internally, but if it's say, via a ribbon cable, you may be able to just unplug it and secure it

THANK YOU FOR ALL YOU DO!!! wrote:

I decided to take a look at why my 4041 thermal printer was printing unrecognizable characters. I was able to fix it by removing the timing disk cover and cleaning the contacts and timing disk with

A few days ago I approved someone who wanted to join TekScopes. Fortunately one of our members alerted me that he recognized the email ID. The person (or group) using that email ID was joining other

I have this option on my 2465 - 300 MHZ version and I purchased the cable. I have plans to get it to work with a computer and I'm looking for someone who has done this, so I don't need to reinvent

Colin, Glad to hear it is working OK, if there is no need to clean the cam switches then don't rush into it, there is advice around that says energetic cleaning with the wrong type of paper can

My 2465BDM has a GPIB option. I'll never use it; all my other instruments either have no external connection to the world (my computer) or use ethernet. Relative to heat and energy consumption would

Hi Dave, I found this book you recommended under the "Concept Series" in tekwiki. It is very helpful and easy to read. Another article, a little more advanced, is on www.tek.com. It goes beyond

Hi Dennis, Hi All interested in TekScopes and Groups.io The email truncation, in a post, is probably, but not necessarily, the Groups.io settings for TekScopes. You could see the following, 2 links